0
beczause you can get fats from carbohydrates -leira custodio
What else can I help you with?
Should the course adjustment knob be used for focusing with all three objectives?
Yes, but only to do the most basic focusing. Keep in mind that you can break your slide if you move too close with the coarse adjustment knob and any focusing close to the slide should be done with the fine adjustment knobs. (taught HS Chemistry). Hope that helps!
What focus adjustment should you use to focus on the specimen under the high power?
When focusing on a specimen under high power, you should use the fine adjustment knob. The coarse adjustment knob is typically used only under low power to prevent damage to the slide or objective lens. The fine adjustment allows for precise focusing, which is crucial at high magnifications to achieve a clear and sharp image of the specimen. Always ensure that you start with the lowest power objective before switching to high power for safety.
Why should the fine adjusment knob be use only with the HPO?
You may easily break or crush the slide.
Why should the fine adjust knob be used only the hpo?
beczause you can get fats from carbohydrates -leira custodio
Why must the course adjustment knob be turned forward only while watching from the side?
The course adjustment knob must be turned forward only while watching from the side to ensure that the microscope's objective lens moves closer to the specimen. This allows for focusing on the specimen and achieving a clear image. Turning the knob in any other direction may result in moving the objective lens away from the specimen, leading to an out-of-focus image.
Why should?
Why should the fine adjustment knob be used only with the HPO
Why ?
Why should the fine adjustment knob be used only with the HPO
(-3)-5-(-2)-1?
Why should the fine adjustment knob be used only with the HPO
Why should the fine adjustment knob be used only with the HPO?
The fine adjustment knob should be used only with the high-power objective (HPO) because it allows for precise focusing at high magnifications. Using the fine adjustment knob with lower-power objectives can result in the objective lens hitting the slide, potentially damaging both the lens and the slide.
Why should the fine adjustment knob be used only the hpo?
beczause you can get fats from carbohydrates -leira custodio
What are the 2 knobs on a microscope called?
There are two adjustment knobs (coarse and fine) on a microscope so you can move the stage at two different speeds. The coarse moves a lot per revolution, while the fine adjustment knob moves the stage at such small increments that it is nearly impossible to notice when looking from the side. The coarse adjustment knob should be used to get the stage closer to the lens only while you are looking at the microscope from the side. The fine adjustment knob can be used when you are looking into the microscope because there is a much lower chance of running the stage into the lens and breaking it.
Why should you only use the fine adjustment knob when you are using high power?
The fine adjustment knob should be used with high power magnification because it allows for smaller, more precise movements of the objective lens. This helps to prevent damage to the slide and objective lens, as well as minimize the risk of crashing the objective lens into the slide.
When is the only proper time to use the fine adjustment on a microscope?
The fine adjustment on a microscope should be used when you need to make precise focusing adjustments to clearly observe the details of a specimen. It is typically used after using the coarse adjustment knob to bring the specimen into approximate focus.
What does the fine adjustment knob on a microscope do?
The fine adjustment, the two little knobs on both sides of a compound microscope, is rotated to move the body tube down or the stage up in tiny distances to help you focus in HIGH power.The fine focus knob is geared with a different ratio than the coarse knob to "fine tune" your focus. It allows for tiny adjustments to the focus setting, rather than larger ones.
Should the course adjustment knob be used for focusing with all three objectives?
Yes, but only to do the most basic focusing. Keep in mind that you can break your slide if you move too close with the coarse adjustment knob and any focusing close to the slide should be done with the fine adjustment knobs. (taught HS Chemistry). Hope that helps!
What are the adjustment knobs on the microscope used to change focus?
the big knob is called the coarse adjustment knob and the smaller one is the fine adjustment knob coarse does a large scale focus, fine does such small scale focus you can only see a difference in how the (item under microscope) looks. You don't see the stage / nosepeice move up or down.
The fine adjustment knob is used to focus an image only on what power?
AnswerFine adjustment knobs can be used on any of the different power lenses. Fine adjusting knobs help in clarifying a partially focused image.
