Want this question answered?
The object on the viewing stage is close to the lens of a microscope. Racking downward risks the lens touching the object and damaging either the object itself or the lens. Before moving the lens down, make sure you can see the lens and the object from the side of the microscope to void the two touching each other.
Possibly a blue or violet colour.
One rule is while looking through the scope move the microscope UP only. If you don't then you risk bumping into your sample or slide.Use the large or gross focuser first then your small or microfocuser.
haste
On a the microscope I use, the ocular (eyepiece) has a magnification power of 10x. The 'low' (or 'scanning') objective lens is 4x, the 'medium' has a power of 10x, and the 'high' has a power of 40x. Multiply the ocular by the lens you're using to get your 'total magnification.' TIP: Only use the coarse adjustment knob while on 'low' power, then use the fine adjustment. Why? If you use the coarse adjustment knob on 'medium' or 'high,' there's a good chance you'll crack your slide. -BugCrunch
While moving the microscope from one place to another, always keep it in an upright position.
You should not leave a meat thermometer in the turkey while it cooks. This is very dangerous and should be avoided.
No, it should not affect it. Some computers have the CPU placed upright, while others fasten it on its side. Neither one has an advantage over the other.
The stage of the microscope should be kept clean and dry A microscope must always be carried with both hands. One holds the limb while the other is placed under the base to provide support
leave it alone
a compound microscope has two or more lens while a simple microscope has only one lens
it supports the microscope :)
You could. But you should not because of the freon in the lines. If the fridge was transported upright is should be ok but if it was lying down (not good) you should stand it up for a while before you turn it on.
leave them for a while, and they should do something
light is must for optical microscope while is not necessary for nonn optical one
The function of the arm on a microscope is to support the tube and connect it to the base. It is the part of the microscope you gold onto while carrying it.
The function of the arm on a microscope is to support the tube and connect it to the base. It is the part of the microscope you gold onto while carrying it.