with the high-power lens, very small adjustments can produce very large changes in focal field; the coarse adjustment knob simply moves things too quickly to be useful. further, on cheaper microscopes, the high-power lens is longer and closer to the target; using the coarse adjustment can bang the lens into the slide being viewed, which can damage the slide or the microscope.
Because you'll go way out of focus. Also, you can have the magnifier hit your smear. I learned this the hard way. You can turn it too much and you'll hear a thud. Then your smear can be ruined!
the coarse adjustment is not used for focusing high power, as a matter of fact it is used to focus objects of low power.
You don't have enough control over the distance. You can also crush the slide and cover or you will move it too much and will lose focus.
bc it can break the lenes
It will crack your slide
it moves dramatically and if you move it too close you can cause your slide and the knob to break
First of all, one should never call it high power, it is morecommonly called the "high objective", yet that is not what this question is asking. To answer the question: You use the fine adjustment knob. This knob should be located near the coarse adjustment knob, on the opposite side of the microscope (at the same height as the coarse adjustment knob), or even as a separate knob protruding from the coarse adjustment knob. The fine adjustment knob is smaller in size. You should never, ever use the coarse adjustment knob under the high objective, you could scratch the microscope slide, cover slip, high objective lens, or in a worst case scenario break the high objective lens.
Parts of a microscope are ocular lens, low power objective, nose piece, objective lenses, stage clips, light source, body tube, coarse adjustment, arm, diaphragm, eyepiece, base, stage, fine adjustment, mirror, stain, and high power objective.
The function of a microscope's coarse adjustment knob is to improve focus on the object under study by adjusting the lens. Unlike the fine adjustment, coarse adjustment moves the lenses quickly.
Coarse adjustment knob.
*Draw tube *Body tube *Coarse adjustment *Fine adjustment *Revolving nose piece *Dust shield *Stage *Stage clip *Intimation joint *Base *Arm *Low power objective *oil immasion objective *Condenser *Mirror
Coarse Adjustment
when should the coarse wheel adjustment be used
First of all, one should never call it high power, it is morecommonly called the "high objective", yet that is not what this question is asking. To answer the question: You use the fine adjustment knob. This knob should be located near the coarse adjustment knob, on the opposite side of the microscope (at the same height as the coarse adjustment knob), or even as a separate knob protruding from the coarse adjustment knob. The fine adjustment knob is smaller in size. You should never, ever use the coarse adjustment knob under the high objective, you could scratch the microscope slide, cover slip, high objective lens, or in a worst case scenario break the high objective lens.
The coarse adjustment knob allows quick displacement of the optical tube.
Parts of a microscope are ocular lens, low power objective, nose piece, objective lenses, stage clips, light source, body tube, coarse adjustment, arm, diaphragm, eyepiece, base, stage, fine adjustment, mirror, stain, and high power objective.
The coarse adjustment is used to focus in on the specimen. It accomplishes this by moving the stage or the upper part of the microscope.
Coarse adjustment
It is the less precise focusing knob on a microscope.
For low power you can use the coarse adjustment and fine adjustment for high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
the coarse adjustment
coarse adjustment
the coarse adjustment