plinth beam is a part of a structure can transfer loads to the adjacent columns
Firstly, it is more appropriate to call this type of beam a "grade beam". It is not mandatory to provide a bed (of PCC or brickwork) beneath a grade beam in framed structures. However, it is advisable to provide one under the following conditions or when considering the following circumstances: 1. Unevenness of the ground on which the beam is laid. 2. Reducing cover to reinforcement for structures in contact with soil. 3. To prevent erosion of disturbed earth from below the beam. 4. Mobilization of elastic support throughout the length of the beam in the event of an over-load such as support settlement or earthquakes.
Electric plinth heaters come in many shaped and many different models from various companies. The technical requirements will differ based on multiple reasons.
the part of beam which has maximum section modulus should take more load for more strength.
An inverted beam is a beam whose bottom is the same as the slab. A drop beam is a beam that is put under the structural member it supports.
Plinth beam is provided to 1. support the wall above it 2. act as tie beam for columns
plinth beam is a part of a structure can transfer loads to the adjacent columns
A plinth refers to the base that a column rests on. Tie beam refers to a beam that connects two or more columns, that acts as a stiffener.
3.6
plinth beam is a part of a structure can transfer loads to the adjacent columns,grade beam is a type of foundation system used to distribute the weight of a building over unstable soil. The grade beam may sit directly on the loose soil.
Plinth protection is the additional length or strengthening provided in the lowest portion of a beam or the lower portion of a foundation/floor by providing additional thickness/height.
i do not know i am asking wiki answer they should privide it for us
plinth= base. The statue was erected on a concrete plinth.
plinth defination
The answer is a plinth block, or a plinth.
Firstly, it is more appropriate to call this type of beam a "grade beam". It is not mandatory to provide a bed (of PCC or brickwork) beneath a grade beam in framed structures. However, it is advisable to provide one under the following conditions or when considering the following circumstances: 1. Unevenness of the ground on which the beam is laid. 2. Reducing cover to reinforcement for structures in contact with soil. 3. To prevent erosion of disturbed earth from below the beam. 4. Mobilization of elastic support throughout the length of the beam in the event of an over-load such as support settlement or earthquakes.
in short: plinth is base of structure. it transmit weight of structure to the soil. many times plinth have to deal with external agencies like water,roots of trees,termites, etc this can affects the life of plinth and makes it weaker so its essential to protect plinth from such agencies..therefore PLINTH PROTECTION is necessary.. ......................... abhishek 9404547373