answersLogoWhite

0


Best Answer

The human body naturally accumulates static electricity - through friction with the man-made fibres we wear. An anti-static wrist strap is connected to just the earth circuit in the household mains supply - this sends any build up of static down to earth - preventing it getting to the computer. Many computer circuits are so delicate that a tiny amount of static is enough either to wipe a computer chip - or even damage the circuitry within the chip itself !

User Avatar

Wiki User

12y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

10y ago

Anti-static wrist straps are most commonly used to protect someone who works with highly-sensitve electronic equipment. Working with this type of equipment can lead to a buildup of static electricity on one's body, which can lead to an electrostatic discharge. This activity doesn't usually harm humans, but can damage the electronic equipment.

This answer is:
User Avatar

User Avatar

Wiki User

8y ago

An antistatic wrist strap, ESD wrist strap, or ground bracelet is an antistatic device used to safely ground a person working on very sensitive electronic equipment, to prevent the buildup of static electricity on their body, which can result in electrostatic discharge (ESD).

This answer is:
User Avatar

User Avatar

Wiki User

7y ago

An anti static wrist strap is worn on the wrist, with a cable connecting the strap to earth. It is used to disperse any static electricity build-up in a person's body. Static electricity could spark and damage delicate computer components when a person is working and touching the motherboard.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

to equalize the electrical charge between a person and the equipment

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

so you don't hurt the computer chips

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the purpose of wearing an antistatic wrist strap?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Computer Science
Related questions

What should a computer repairman avoid wearing when working on a CRT monitor?

Jewelry and Antistatic wrist strap


Which two tools can a PC support technician use when taking apart a computer to best protect computer components against ESD?

A: it is not actually a tool but a ground wire connected to the earth ground which is connected to the chassis The best way to protect your system against ESD is to use a ground bracelet together with a ground mat. Consider a ground bracelet essential equipment when working on a computer.


Are antistatic wrist wraps necessary?

If you handle component boards / motherboards, etc. only by their edges, or occasionally touch a water pipe or other earthed metal fittings, to dissipate body static, then an antistatic wrist strap is not necessary. I don't wear one, but it depends on how confident you feel - if in doubt, wear one.


What computer components should you not touch while wearing antistatic wrist strap?

I'm not aware of any component you cannot touch. As long as the power is off and you are grounded properly. You would have to touch any component part in order to replace or upgrade it. When using a Antistatic wrist strap you should always male sure it makes contact your skin properly, if the strap has a crocodile clip at the end make sure it is attached to a suitable grounding point. You can clip it to the PC chassis but make sure the power is off at the wall socket but the plug is left inserted, if you unplug the PC completely there is no grounding. Saying all this grounding yourself is a bit over rated. I rarely use a grounding wrist strap and have never had an incident.


Why should you not wear an antistatic wrist strap to repair power supply?

The problem here is that you may encounter high voltages in the power supply. So wearing an antistatic wrist strap may put you at a greater risk of electric shock. Besides, there are few if any sensitive electronic components inside the power supply unit.In addition, make sure the power supply is not connected to any power before servicing it. If you need to go near any large capacitors, you will want to discharge them. In fact that is a good precaution to take any time you remove the circuit board from the power supply unit.


What tool is used for hardware to stand on to prevent static electricity from buiding up?

You would place hardware on an anti-static mat to prevent static electricity from building up. If you don't have that, you could use other things such as an antistatic wrist strap or even antistatic bags.


How do you use an antistatic wrist band?

There is a strap which you wrap around your wrist and a wire with a clip on the end. Attach the clip to the chassis of the computer to eliminate static electric discharge. Any difference in voltage between the chassis and you will flow through the wire and be neutralized.


What is the length of the wrist strap?

Length of wrist strap/Band circumference = 7 inches.


What does wrist grounding strap contain?

resistors


How do you put a wrist strap on a ds?

You take the wrist strap and look at both ends. One end should have a tinier strap attached to it. You take the tiny strap and look at the back end of the ds. It should have two small holes there. Then take the strap and stick it in one hole. then , push the strap, and it should come out the other hole. Take the strap that came out the hole, and make a loop, by splitting them apart. Slip the actual wrist strap through the loop, and pull it through. Bingo!


Can you give an example of a sentence using the word strap?

The strap of his wrist watch became loose.


Does a Wii Remote come with original strap?

All wii remotes come with the wrist strap.