The hot liquid could crack a cold glass.
you can if you put a spoon it the glass first before pouring in the hot liquid, otherwise the glass might crack
The particles in a liquid are able to move around and change its shape so you can pour it into a glass. It is very simple if you think about it.
Particles in a liquid move past each other, allowing the liquid to flow smoothly. When you tilt a container to pour a liquid, the particles are able to rearrange and flow into the glass due to their ability to move and adapt to the new shape. This allows the liquid to flow and fill the glass evenly.
the proper way of refilling a drinking glass is to pour the liquid into the side of the inside of the glass slowly.
Yes. Pour boiling water into a cold cup of untempered glass and you will see. DO NOT do this without supervision. In fact, don't do it at all. Just about anything can be broken by water, given enough of it, over a long enough period of time. if yo pour to hot water in it or if you put in in the frezzer with liquid in it
Your best bet is to FIX the leak. You are asking for real trouble if you add liquid glass. It will coat the sensors and they will not work properly.
The particles of a liquid retain the same volume but are not fixed in place. As they retain the same volume no matter what container they are in, it is possible to pour juice into a glass without the particles dispersing as the particles of a gas would. Because the particles of a liquid are not fixed in place, as in a solid, the liquid can flow and fit itself to the shape of the glass.
Milk is a liquid,so it takes the shape of a container.(properties of a liquid)
When we pour very hot water into an empty glass, the inner surface of the glass will expand as matter expands when heated. But the inner surface of the glass will expand more than the outer surface of the glass because more heat is applied to the inner surface of the glass.
Most types of glass aren't designed for hot drinks. When one part of the glass is suddenly heated up other parts might not be, the stress put on the brittle glass causes it to crack or shatter possibly spraying people near by in hot liquid.
Pouring boiling water into a cold glass can cause the glass to shatter due to the extreme temperature difference. The sudden expansion and contraction of the glass can cause it to crack or break. It is safer to gradually heat up the glass or use tempered glass that is designed to withstand thermal shocks.
To properly pour beer from a keg, first make sure the keg is cold. Attach the tap to the keg and open it fully. Tilt the glass at a 45-degree angle and pour the beer slowly down the side of the glass to minimize foam. Straighten the glass as it fills to create a proper head. Enjoy your beer!