answersLogoWhite

0

because in this voltage harmonics are not present

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How many volts does a bts uses?

By BTS, do you mean Base Transceiver Station? Such equipment can be found in cell phone towers. Usually a BTS runs on 48V DC.


What is the power range of BTS?

GSM900 transmitted power from BTS: 39dBm GSM1800 transmitted power from BTS: 36dBm


Why is a rectifier needed for a GSM BTS?

This is bcoz we need -48V for Gsm BTS, -48 DC is used to control Fluctuation So the main function of this is 1) To convert AC to DC 2) To control overloading


Why use -48V dc in bts?

-48 v is given to BTS because in this voltage Noise generation is minimum. Because two terminal comes out from the battery and through red color wire we ground the +ive terminal so that possibility of noise interference will get zero because noise occurs only in the +ive terminal that's why we use -ive voltage in the BTS.


Why BTS operated at -48 Volts?

All telephone exchanges use -48V DC Power supply. The negative potential is used to prevent electrolysis deposition at Battery terminals. Telephone normally work with about 30ma current driving a line impedence of about 1600 ohms (to drive about 5KM distance). Hence 30ma*1600 ohms=48 volts.


What is the main components of Nokia BTS Site?

main component of nokia bts is 1)trx which contains 8 slots for call receive and transmit to another mobile station through radio interface 2)second one is psu (power supply unit) which produces the power to bts to get the operation 3)third one is bb(base band) card which support two trx in operation 4)rest of parts is boa,coupler,combiner,duplexer etc


Output power rating of PWSA card in Ultra BTS?

600 WATT


What is h difference between 2g bts and 3g bts?

3g BTS is greater than 2g bts. and it is with new technologies.


Why use power interface unit in telecom?

it is a unit in a BTS i.e. base transreciever system..these bts are installed with towers that are used for mobile communication. The piu consists of a power plant and battery bank. power plant has rectifier to convert ac to dc and battery back up is used in case of power failure.


What is the function of fifa card in nokia flexi BTS?

fifa is a transmission module with support for 16 E1 channels, it receives DC power from BTS through its backplane connectors; power consumption of a fully equipped FIFA is less than 76 w.


Difference between indoor bts and outdoor bts?

Indoor BTS: It is placed in a shelter Air-condition is must Very sensitive Outdoor BTS: No shelter required Air-condition is not a must Not very sensitive comparing to indoor bts


How much distance between BTS to BTS?

typically 2km