Want this question answered?
If the electrical box is grounded, check with a tester, the "hot" wire will have a voltage to the the grounded box the neutral wire will not. If the box is not grounded, with the breaker supplying the voltage turned off, use a tester on the resistance scale to check for continuity between the wires and a cold water pipe or some other grounded medium. The neutral will have continuity between the wire and a ground the "hot" wire will not.
A junction box is a container that holds electrical connections. The idea of a junction box is usually to keep wires safe, secure and free of dust, dirt and damp. A junction box is usually built within the layers of a wall so that all wires are concealed and the build looks neat and tidy.
According to the NEC and CEC, it depends on the size of the box.
Folding grades have to be flexible enough so that when the board is folded to make a box--such as a cereal box--the surface will not split or crack.
You will have to run wires from your electric box in your house, I would suggest barring these wires.
Its a map that folded in a glove box, also Folded mountian is Black slang for male genitals
No.
The us flag should be folded in a triangle and stored in a glass box!
a box which has resistance between 1 ohm to 50000 ohm
Yes. Providing you maintain double insulation by means of heat shrink, a junction box etc.
because , look at your BOX DIAGRAM
The use of a resistance box or a "Decade Box" is to help calibrate instruments used to measure electrical values such as Voltage, Current, and Resistance. Without them you would not have a known value of resistance to use as a set point.
Resistance decade box is nothing but Resistance bank. It has various ranges of Resistance value ranging from few ohms to few mega ohms. In other terms, large value of resistance are fabricated in single box is said to be Resistance decade box.
If the electrical box is grounded, check with a tester, the "hot" wire will have a voltage to the the grounded box the neutral wire will not. If the box is not grounded, with the breaker supplying the voltage turned off, use a tester on the resistance scale to check for continuity between the wires and a cold water pipe or some other grounded medium. The neutral will have continuity between the wire and a ground the "hot" wire will not.
In a box it is common practice to join two black wires, two white wires and two ground wires, for example, to extend the circuit to another location. Provided you don't overload the circuit it is okay to put 3-wires into the comparable wirenuts for your external light. There are some added caveats including not exceeding the number of wires designed for the box (usually 4); and outside circuits normally require a GFCI circuit for safety.
If the box has been cut to frame its worth $50- 75.00 cdn funds.If the box is just folded down and can be folded back up with the autograph on it will get you around 150.00 cdn.
we use it when we require a variable resistance in a circuit