0
Why there is an induced current in a coil when the bar magnet is thurst into the coil?
Wiki User
∙ 9y ago
This is called ELECTROMAGNETIC INDUCTION.
The electrons have a magnetic field; the magnetic fields of electron and bar magnet interact. Both the bar magnet and the electrons are "pushed". The electrons are lighter; they move more easily. Moving electrons are called a current.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
In which case will electric current be induced in a coil of wire?
The coil must experience a changing magnetic field in order to have a current induced. You can rotate the coil between the poles of a magnet, or rotate the magnet around the coil.
Why there is an induced current in a coil when a bar magnet is thrust into the coil?
photons are trapped in the magnetic field when the photon hits the electron of the copper coil the photon take the spot of the electron , its free to move.Answer2: The induced current is a consequence of the conservation of the magnetic field.AnswerCurrent isn't induced into a coil -it's voltagethat is induced. Any current flows as a consequence of this induced voltage only if there is a load connected to the coil.
Moving a magnet in and out of a coil of wire produces?
That will induce a voltage across the wire.
Why there is an induce current in a coil when a coil is compressed in a magnetic field?
compressing a coil in a magnetic field means that there is a relative movement of the the said coil existing in a magnetic field, hence current will be induced. induction law.Another Answer'Current' is not induced into a coil. It's voltagethat's induced; if the coil forms a closed loop, then current will flow; if there is no closed loop, then no current will flow.The induced voltage results from either a change in current through the coil, or from the relative movement between the coil and an external magnetic field.
Why is there an induced current in a coil when a coil is rotated between two magnets?
One of the laws of physics is that when a conductor moves in a magnetic field a current is induced in that conductor. If you then coil that conductor you effectively end up with several conductors and you'll get more current. Incidentally, you might be better of rotating the coil between the poles of a single magnet (a horseshoe type) rather than between two magnets as you've said in your question, because the two may cancel their magnetic fields out, depending on how they are positioned, whereas one won't.AnswerIt's voltage, NOT current, that is induced into a conductor. Current , resulting from this induced voltage, will only flow providing the conductor forms a complete circuit.
In which case will electric current be induced in a coil of wire?
The coil must experience a changing magnetic field in order to have a current induced. You can rotate the coil between the poles of a magnet, or rotate the magnet around the coil.
What happen in coil of wire when you pass a magnet through it?
A current would be induced in the coil.
Why there is an induced current in a coil when a bar magnet is thrust into the coil?
photons are trapped in the magnetic field when the photon hits the electron of the copper coil the photon take the spot of the electron , its free to move.Answer2: The induced current is a consequence of the conservation of the magnetic field.AnswerCurrent isn't induced into a coil -it's voltagethat is induced. Any current flows as a consequence of this induced voltage only if there is a load connected to the coil.
Why there is an induced current in a coil when a bar magnet is thrust out of the coil?
The magnetic lines of force surrounding the bar magnet, cut through the coils of wire, causing electrons to move. This induces an electric current. It is the movement that is important, whether moving into, or out of, the coil.
What happens when a magnet is moved towards a coil?
You will generate electricity. As the wire cuts through the magnetic field.As the magnet is moved, there will be an induced electro-motive force (EMF) which can cause a current in the coil. Once the magnet stops moving, the current will go to zero.
What are two ways to cause a current in a wire coil?
Different ways to induce current in a coil are as given below:(1) If a magnetic field is changed round a coil then an induced current is set up in the coil. It can be done by taking a bar magnet and bringing it closer to the coil or taking it away from the coil.(2) If a coil is moved in a magnetic field, then again an induced current is set up in the coil.(3) If a coil is rotated in a uniform magnetic field, it may also cause an induced current in the coil.(4) If we take two coils and insert them over a non conducting cylindrical roll then on changing current flowing in one coil, an induced current is obtained in the other coil.CommentYou don't induce a 'current' into a coil; you induce a voltage. If that coil is open circuited, then no current will flow. If, on the other hand, the coil is connected to a load, or its opposite ends short-circuited, then the induced voltage will cause a current to flow. Remember, current will only flow if there is a load, or short circuit, and the value of the current will depend upon the value of the induced voltage and the resistance of the load or short circuit.
Moving a magnet in and out of a coil of wire produces?
That will induce a voltage across the wire.
What are the reasons why a current is induced in a coil?
Current is not induced into a coil. It's voltage that is induced into a coil. If the coil is connected to a load, or even short circuited, then a current will flow as a result of the induced voltage -but it's the voltage, not the resulting current, that's induced!Voltage is induced into a coil because the the changing magnetic field, due to the change in current (0 to Imax or vice versa) applied to that coil. The process is called 'self induction'.
What is alternating current normally produced by?
Alternating current is normally produced by rotating the magnet in the coil of an induced alternating voltage. When connected to a circuit, an alternating current will flow.
What are the different ways to induce current in a coil?
Different ways to induce current in a coil are as given below:(1) If a magnetic field is changed round a coil then an induced current is set up in the coil. It can be done by taking a bar magnet and bringing it closer to the coil or taking it away from the coil.(2) If a coil is moved in a magnetic field, then again an induced current is set up in the coil.(3) If a coil is rotated in a uniform magnetic field, it may also cause an induced current in the coil.(4) If we take two coils and insert them over a non conducting cylindrical roll then on changing current flowing in one coil, an induced current is obtained in the other coil.CommentYou don't induce a 'current' into a coil; you induce a voltage. If that coil is open circuited, then no current will flow. If, on the other hand, the coil is connected to a load, or its opposite ends short-circuited, then the induced voltage will cause a current to flow. Remember, current will only flow if there is a load, or short circuit, and the value of the current will depend upon the value of the induced voltage and the resistance of the load or short circuit.
What would be the direction of the induced current if the s-pole of a bar magnet were quickly withdrawn from it?
That depends on the direction in which the coil of wire is wound.
What will happen to the current if the magnet and coil were not moving?
I assume you mean in a setup similar to an electrical generator. Here, current is ONLY produced if there is relative movement, between the magnet and coil. Without movement, there will be no current.
