All Transformers contain both primary and secondary coils. The primary will refer to the secondary when the voltage is to high. As voltage increases, it passes down the power to the secondary for efficient distribution of power.
primary and secondary coilsAnswerPrimary and secondary windings.
No. the primary winding is called the primary; the secondary winding is called the secondary. These are both wrapped around the iron core of the transformer. The core helps magnetically link the primary and secondary, which causes the transformation of voltage and current from primary to secondary.
Secondary current = Primary current *(Number of secondary turns /Number of primary) turnsAnswerA current isn't 'induced' into the secondary winding of a transformer. It's a voltage that is induced into the secondary winding.Provided the secondary winding is connected to a load, the secondary voltage then supplies a secondary current which is determined from (Is = Vs/Rload). The primary current then depends upon the value of the secondary current and the turns ratio.
It depends on the turns ratio between the primary and the secondary. If the ratio were 10:1, a step-down transformer, for instance, the current in the secondary would be about 50A. If it were 1:10, a step-up transformer, however, the current in the secondary would be about 0.5A.AnswerThe primary current doesn't determine the secondary current. The secondary current is entirely-dependent on the secondary voltage and the impedance of the load. It is this secondary current that the determines the primary current. So you should be asking, "What value of secondary current would result in a primary current of 5.0 A?"
I assume the primary has 12 volts applied. The voltage ratio from primary / secondary is equivalent to the turns ratio = 10/20, so the primary voltage is 1/2 of the secondary voltage. The secondary voltage is 24.
primary secondary
Primary and secondary support and compliment each other. The primary basically refers to the root of a given problem.
Primary data refers to data that is obtained from a first-hand experience. Secondary data, on the other hand, refers to data that has been gathered by others.
A primary civilization refers to the first advanced societies that emerged in human history, such as Mesopotamia or Ancient Egypt. A secondary civilization refers to later societies that built upon the knowledge and advancements of primary civilizations while creating their own unique cultures and developments.
Primary transmission refers to public transmission using signals that are also forwarded for secondary transmission irrespective of location.
Primary refers to the first level or basic stage, secondary refers to the second level or intermediate stage, and tertiary refers to the third level or advanced stage in a process or classification system. This terminology is often used to describe different sectors of the economy, education levels, or healthcare services.
Primary Means, it is individual there is no dependence, But Secondary will allays depends on Primary, If you want to do Secondary, you should complete primary first, There is no precondition to primary, but for Secondary Primary is the Precondition, first you should do primary, then only you are able to do secondary.
primary: Raul Secondary: Julie
primary and secondary demand
Historical sources are classified as primary and secondary source. The primary source refers to the written or developed document or object during the study and the secondary source refers to the analogy or interpretation of the primary source.
Primary deviance refers to the initial act of rule-breaking or deviant behavior, while secondary deviance refers to the continued or increased engagement in deviant behavior as a result of societal reactions to the initial act. Primary deviance is typically seen as a single event, whereas secondary deviance involves a person adopting a deviant identity.
Voltage on primary/Primary turns = Voltage on secondary/Secondary turns