Your motorcycle ignition could be jammed due to damaged parts in the ignition, an ECU safety feature, lack of lubrication, or the key itself could be damaged. If the key is stuck in the ignition, we suggest calling a locksmith before forcing it out.
Motorcycle ignitions are more complex than ever, with intricate fuel mapping and ECU regulation. Troubleshooting a motorcycle key that’s jammed in the ignition can be time-consuming.
Is the bike in neutral? Has any alarm system been deactivated? Is the battery charged?
By turning the ignition key...
With a key, by turning on ignition
If the Car didn't start with the key turning the ignition then the car was "hotwired" to turn the Car on.If the key did not start the car, how was it started.
Your ignition switch crapped on you
No matter what dirt bike you are riding you will want to install the switch via the ignition coil. Obviously based on the dirt bike you will need to find a convenient place for the key switch but make sure you run it through the ignition coil. Especially if you have both a electric and kick start on your dirt bike.
So it would seem. If the ignition is in the column it may also be jammed by the steering wheel lock. Try turning the steering wheel and holding it while turning the ignition key.
Put it in park , insert the ignition key into the ignition and turn the key to start it.
More than likely because of a short. its probably a shorted ignition switch
You need to put the key in the ignition, turn the ignition on, shift to neutral, turn on engine safety switch, wait for fuel pump to cycle, hold the clutch in, and press the start button. If the bike will not start, it may be your battery.Ê
It is a clicking sound
turn steering wheel to left tight while turning key
Try turning the steering wheel back and forth while turning the key.