During open circuit test on transformer, no load is connected across the secondary side. Hence, the total power drawn by the transformer is only to induce the voltage across the secondary, i.e., core loss AND negligible amount of primary copper loss. As the primary copper losses during open circuit are negligible, it is practice to attribute the open circuit power to core loss.
The standard for testing of Miniature Circuit Breakers - IEC 60898 has arbitrarily decided on 28 days during which the temperature rise is to be measured. The standard states: "The circuit-breaker is in the closed position, the current being established and interrupted by an auxiliary switch. During this test the circuit-breaker shall not trip. During the last period of current flow the temperature-rise of the terminals shall be measured." If the characteristic can be verified for 28 days, the MCB passes the test. Hence 28 days, and not 30 days.
The consistency of software is measured during the process of user testing carried out either in-house or with a private beta test. Some of the main variables considered include reliability, performance, stability, and authentication issues.
Since a short circuit is, essentially, a zero impedance connection between nodes, the current in a short circuit is limited only by the ability of the source. In the case of an ideal voltage source connected to an ideal short circuit, you would have infinite amperes.
Unipolarpulse waveforms consist of an applied anode potential during the on-period and an open-circuit potential during the off-period.
Reactive power is opposite to Active power. The vector sum of these two powers is apprant power. So reactive power is vector difference between Apprant power & actual power given by Reactive power= Root of (difference between squares of apprant & active power). It is lost power of the system on which power factor depends.
Because of the polarity of the circuit. The signs of measured current and voltage depends on the direction of the current and voltage.
The standard for testing of Miniature Circuit Breakers - IEC 60898 has arbitrarily decided on 28 days during which the temperature rise is to be measured. The standard states: "The circuit-breaker is in the closed position, the current being established and interrupted by an auxiliary switch. During this test the circuit-breaker shall not trip. During the last period of current flow the temperature-rise of the terminals shall be measured." If the characteristic can be verified for 28 days, the MCB passes the test. Hence 28 days, and not 30 days.
The shunt should short-circuit the bell during rotary dialing, so that the bell doesn't jingle as you dial out.
check your answer
Disconnect the power source.
those who remain lateral during study and remain connected is known as uni lateral circuit
active
She often wrote about the beauty of nature. More to the point, she started writing during the peak of the Romantic period, approximately 1800-1850.
The resistance goes to infinity.
the winds,how deep the snow is and the air pressure
Dependent variable, according with my sources. :)
phase change