It removed impurities from, and led to cheap and plentiful, steel. More steel was produced at a low price, more steel products were made, new inventions occurred from this, more money was made, and general improvements were made.
Henry Bessemer worked on the problem of manufacturing cheap steel for the purposes of ordnance production from 1850 to 1855 when he patented his method.
The Bessemer process involved using oxygen in air blown through molten pig iron to burn off the impurities and thus create steel.
Importance:
Many industries were constrained by the lack of steel, being reliant on cast iron and wrought iron alone. Examples include railway structures such as bridges and tracks, where the treacherous nature of cast iron was keenly felt by many engineers and designers. There had been many accidents when cast iron beams collapsed suddenly, such as the Dee bridge disaster of May 1847 and later failures such as the Wooton bridge collapse and the Bull bridge accident of 1860. The problem recurred at the Tay Bridge disaster of 1879, and failures continued until all cast iron under-bridges were replaced by steel structures.
whats the point of putting a question on here if 1 you never get answered and two you never figure it out on your own. this is cheating
because it made steel production possible by converting pig iron into steel
becaus cheese tasts good
The bessemer process was invented by Sir Henry Bessemer.
That would be Henry Bessemer, inventor of the Bessemer Converter which allowed the processing of Steel on an industrial scale. The process involves the removal of impurities (an important factor in Steel manufacture) through oxidation.
the bessemer process and the open-heart process(:
The Bessemer process was the first inexpensive industrial process for the mass production of steel from molten pig iron before the development of the open hearth furnace.
The steel industry.
The bessemer process was invented by Sir Henry Bessemer.
The Bessemer process created steel.
The Bessemer process decreased the money and labor needed to make steel.
The Brooklyn Bridge is made of steel. The Bessemer process made steel affordable.
That would be Henry Bessemer, inventor of the Bessemer Converter which allowed the processing of Steel on an industrial scale. The process involves the removal of impurities (an important factor in Steel manufacture) through oxidation.
The most important effect of the Bessemer process at the time was its reduction in cost. The decrease in the manufacturing process of steel per long ton was huge.
It was called the Bessemer Process.
the bessemer process and the open-heart process(:
Henry Bessemer
The Bessemer process, developed by British inventor Henry Bessemer, enabled steel to be produced more efficiently
Sir Henry Bessemer invented the furnace which was instrumental in making the steel manufacturing process more effective. But it was Andrew Carnegie who implemented the furnace in his steel plants along with a few other innovations which made the steel manufacturing process cheaper.
No, he did not, but he did invent the Bessemer Process, which was a cheaper and more efficient way of making steel.