Why will drivers side electric window not roll down when all others will?
Busted switch, motor or wiring.
Your rear drivers side window does not roll down where should you look to fix the problem the electric motor?
What would cause the drivers side rear passenger electric window switch of a Ford 2004 Expedition to go down but not up yet from the drivers master switches it can raise that same window up AND down?
What might be the problem if the electric drivers side window will not go down on a 1990 Oldsmobile 88?
Where do i get parts to fix electric window on passenger side of 2001 daewoo nubira since it won't go up?
MY DRIVERS WINDOW WAS STUCK IN THE DOWN POSITION, I CHANGED THE WINDOW SWITCH BUT IT DID NOT HELP, I FOUND OUT THAT WHEN I USE THE EXPRESS DOWN THE WINDOW STICKS IN THE DOWN POSITION. I BANGED ON THE DOOR PANEL AND IT STARTED WORKING. NOW I DO NOT USE THE EXPRESS AND I DON'T RUN THE WINDOW ALL THE WAY DOWN TILL I CAN SWAP IT OUT
How do you fix a problem with the drivers side electric window for a 99 Malibu when the motor seems to be good but the window gets stuck intermittently when going up and down?
Your drivers window wont go down When you push the button to roll it down it makes noise but the window doesnt move What could the problem be?
Electric window on a Toyota MR2 goes down but it wont go up. it send a positive current to both wires on the electic motor.?
Why wont my rear window IN A HYUNDAI ELANTRA roll up but will roll down and you hear it makes a noise going down but not up?
Why would the drivers master window control switch and the window switch behind the drivers side not work on a 1990 Toyota Camry?
The drivers window switch on the master switch energizes a solenoid for the express down feature of the drivers window. The solenoid deenergizes when the window bottoms out causing the thermal overload in the window motor to open. A spring in the solenoid is supposed to break the open circuit and provide power to the close circuit when deenergized. Sometimes the spring gets weak or the solenoid plunger is sticky preventing powering the close circuit…