0
Why wont my 2000 Chrysler cirrus fire i have changed sparkplugs crankshaft sensor distributor cap rotor button still will not fire?
If you are not getting spark, the distributor is common to fail. It is hard to tell from the question if you changed it or just the cap and rotor. Also, do you have fuel pressure. That could be a fuel pump. If you have neither fuel or fire, that could be aa computer or wiring issue.
What else can I help you with?
Why does my 2001 Chrysler Town and Country 3.8 have no spark I changed the cam crank sensors new coil a new computer. Still no spark?
change your sparkplugs
Why would your 96 Chrysler sebring convertible stumble after you have changed the plugs and wires and cap?
you have 2of the plug wires on the wrong plugs or distributor cap
Can you use a 1999 Chrysler Sebring convertible top for a 2002 Chrysler Sebring?
No. The body changed after 2000.No. The body changed after 2000.
What can you do to fix your Volkswagen beetle soundsystem after the sparkplugs were changed and all of a sudden your speakers dont work?
Check your car fuses.
Why while testing spark plugs on 1999 Chrysler Cirrus you take one plug wire out put back in and then the car dies and will not restart Changed all plugs wires and distributor cap but will not start?
For some reason when you take a plug wire off while the car is running it blows the control module built into the distributor. You will have to replace the whole distributor to fix. I have had this happen twice on my 96 Cirrus.
1999 Dodge Dakota problem with the engine sticking when accelerating have changed sparkplugs wires distributor cap and speed sensor dont know what else it could be?
you mean ticking, right? Had the same problem with my 97 with the 3.9. It was an exhaust leak between exhaust manifold & head. New gaskets fixed the problem.
Why hasn't the Chrysler 300 changed?
Why ruin a winner
Do you need to change your spark plug wires if you changed your distributor?
Yes, if the spark plug wires can be connected to the distributor and works.
1996 gmc jimmy it turns over but will not start ive changed the spark plugs distributor cap ignition coil and fuel pump what causes it not to start?
Your Jimmy has a crankshaft position sensor mounted by your crankshaft pully in the front of your engine on the bottom. If the senor is bad your engine does not recognize that your engine is turning and will not fire the plugs. Try changing your sensor and your engine should start.
Changed crankshaft sensor and camshaft sensor now it won t start?
changed camshaft and crankshaft sensors in 2005 toyota tacoma 6 clyinder and now it wont start any idea what to try next
Why would check engine light stay on after crankshaft sensor is changed when code said crankshaft sensor is bad?
Check to see if the wiring is damaged.
Why wont your car start all you did was changed sparkplugs and wires?
Check your wire connections. If the wires are out of order, it may prevent the car from starting.
