answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Why wont my head lights turn of on my citroen xsarah pacasso even with the switch disconnected it is a y reg 2001?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

No brake lights turn signal or hazard lights in a 94 Honda Civic?

Your problem very well could be the hazard switch. i have a 1994 honda civic too i found whenever i disconnected the hazard switch from the wiring harness my turn signals brake lights and of course hazards do not work. Maybe replace the hazard switch..


Why won't brake lights work and car will not go in gear?

The switch on the brake pedal is disconnected or defective. The shifter interlock has to get a signal from the switch to know the pedal is being pressed before it will release the shifter.


1990 Chevy 1500 truck the brake light switch is disconnected and it has no connector going to it you replaced all the bulbs And still your running lights are in the on position when you turn off t?

I have a 1990 Chevy 1500 truck the brakelight switch is disconnected and it has no connector going to it. I replaced all the bulbs. And still my running lights are in the on position when i turn off the truck. My brake lights are still not working after replacing the lights. I have a RV brake accuator also under the steering column can you help me solve my problem?


If the switch activated by your brake for your 1994 Nissan sentra brake lights and tail lights is broken and your lights stay on when the engine is off how can you fix it?

There is a switch just above the brake pedal that is called the brake stoplight switch. When the brake pedal is released, it stops the brake lights from illuminating. Check to make sure the switch is contacting the brake pedal stop where it should. A short term method of not killing the battery would be to unplug the connector to the switch and get a new one. It won't have brake lights when disconnected so I don't recommend driving with it like that. replace the broken switch


Citroen xsara Picasso 2l hdi reversing lights don't work have checked fuse and bulbs what else?

There is a switch on the gear box itself that can go duff, this is where the reversing lights get there signal/power from, if you traced it back I bet you need a new switch on the gear box! not too expensive to fix but you need to be under the car, use ramps and chocks to secure before you do it, or get your local tyre spot to do it for you after you have bought the switch yourself, Citroen would charge you over a hundred to do it??


1996 Grand marquis why no brake lights and can't get out of park?

You have a pressure switch behind the brake pedal. It is either broke, out of adjustment, or disconnected. if it doesn't work you won't have brake lights and you won't get out of park (safety feature).


Why will the tail lights on a 1999 Nissan Maxima not come on?

Faulty bulbs, faulty switch, faulty wiring, disconnected ground.


Brake lights not working on Citroen Xsara Picasso 2001?

No braking lights is usually caused by the failure of the switch behind the brake pedal. It's a fairly easy job to replace, but check it isn't a simple fuse failure first


How do you switch off day running lights?

There should be a wire for your day time running lights that goes into the parking brake valve behind the dash, just disconnect the correct wire and they are disconnected. It worked for me on a 07 classic xl.


Where is the reverse switch on a citroen berlingo?

on the gear box look for wires going to switch


Were is cut off switch on citroen Picasso?

Were is the fuel shut of valve on a Citroen Piasso. Open the bonet and look on the left hand side on the top corner, there is a red push button switch. that is the fuel cutoff switch.


Can you by pass a cut off switch in a citroen saxo?

cut the switch off join wires