If the lights come on but just do not flash, then replace the flasher relay. If they do not come on check the bulb and fuse.
Replace the Flasher Relay.
the hazard switch has two sets of contacts. when hazards turned on, blinkers cannot work,even if hazards dont work.for blinkers to work, hazard sw must be in off position-this reconnects blinker circuits to work normally. BUT-the contacts in the hazard sw get dirty and wont reconnect the blinkers to work
Sounds like switch, and yes with a puller.
Blown fuse, broken wire, no circuit, no earth. Take your pick
what can be wrong with the blinkers in a 1994 grand am?
try replacing the flasher. if the 4 ways work, switch them to see if the system is ok
The blinkers don't work because your car needs a new flasher relay.
Why do the blinkers not work on a 1992 Harley Fatboy Bike
If the bike came out with blinkers , they have be on the bike and work .
There are two different flashers on vehicles. 1 for the turn signals, 1 for the hazard flashers.
so what do i do if my blinkers do not when the lights are on
Could be the control stick for the blinkers. If the lights work, try replacing the stick or checking out the signal path for that blinker