0
What else can I help you with?
Why would brake lights on a 1997 Chevy Camero not work when lights are on?
check the brake light switch that is on top of your brake pedal under the dash, could be out of adjustment or bad.
What would make brake lights to quit working on 2006 Chevy Colorado?
there was a recall on the brake light switch you might want to check into that
What would cause my Turn signals and brake lights do not work on a 2000 Chevy cavalier?
have you checked your fuses?
Why would brake lights not work on 2002 Chevy Suburban when fuse switch and bulbs are good?
No brake lights but turn signals work? Turn signal switch brakes route through it.
Why would cause the brake lights not to work on 2002 Chevy Suburban if the bulbs and fuse are good?
Bad switch.
Why would the turn signals work on a 1995 Chevy Monte Carlo but not the brake lights or tail lights?
Rear loom ground not contacting. Bulbs burned out or missing. Brake light switch or connection to it is fubared.
What would cause brake lights not to work but all other tail lights are working on a 2005 Chevy Equinox?
Blown fuse, both lights are burnt out, There is a wiring or ground issue.
Why would the third brake light work on a 1996 Chevy Monte Carlo but not the other two brake lights work?
this tells you is a simple wiring problem.most likely a loose wire from the third light to the other lights.(third lights provides the power to the other lights)
Why don't the brake lights work when tail lights turn signals emergency flashers and 3rd brake light do on my 1996 Chevy Monte Carlo?
First thing I'd check would be the fuse for the stop lights. If it is okay the next thing I'd check would be the stoplight switch located under the dash where the brake pedal is suspended.
Why would a 2002 Chevy Cavalier's brake lights and turn signals go out in the back without the reverse lights headlights running lights or brake bar going when it's not a fuse or a bulb?
Bad socket? Bad ground? Problem in steering column switch?
What fuse controls the brake lights on a 96 Chevy 1500 All lights and turn signals work except no brake lights when brake pedal is pushed?
I'm not exactly sure which fuse it is, but it doesn't sound like a fuse to me. I would check the switch on the pedal, just simply short acrost it from terminal to terminal with a screwdriver, if the brake lights come on, the switch on the pedal is bad, if they don't then it probably is a fuse.
What is wrong on a 96 Chevy pickup when brake lights stay on when driving but when you push on the brakes the lights come off?
I would first check your brake light switch which is attached to your brake pedal under the dash. Since you can turn off the lights by pushing the pedal it is possible the switch is bad. They are around $10.00.I hope this helps you. Mark
