Usually a problem in the emission control system- have vehicle scanned to determine the problem
No, dipstick. Fluid level is checked through a plug on the side.
Just checked the manual...Dexron II
Tcm (transmission) code present. You need to have the transmission computer checked for codes.Tcm (transmission) code present. You need to have the transmission computer checked for codes.
P0700 EATX (transmission) code presentYou need to have the transmission checked for codes.P0700 EATX (transmission) code presentYou need to have the transmission checked for codes.
Could depend on the age of the vehicle, but most likely a problem with your clutch, but it's more likely that it's your transmission, have everything checked out to make sure everything's working properly.
My 1998 Jeep Wrangler turns over great but will not start. What are the choices to be checked out?
Your timing may be off due to a bad spark plug.
If a washer pump was replaced on a Jeep Wrangler and is still not working the fuses should be checked. The washer switch should also be checked as it could also be causing the pump not to work.
Have transmission fluid and filter changed. Checked Transmission mounts
P0700 : transmission code present.You will need to have the transmission computer checked for codes to know possible causes.P0700 : transmission code present.You will need to have the transmission computer checked for codes to know possible causes.
P0700 is EATX (transmission) code present.You need to have the transmission computer checked for codes to know what to diagnose.P0700 is EATX (transmission) code present.You need to have the transmission computer checked for codes to know what to diagnose.
No.Most automatic transmission are checked in either park of neutral.Check the dipstick or the owners manual for more info.No.Most automatic transmission are checked in either park of neutral.Check the dipstick or the owners manual for more info.