Check fuses, check for any codes in ECM (Engine Control Module), check crank sensor,
If you are referring to the grassland ecosystem, the correct spelling is savannah in UK/Australian/etc spelling. Or savanna in US spelling.If you are referring to the name of a city or person, the correct spelling is Savannah.
Fuel filter, fuel pump, or pressure bypass/relief valve is not providing the correct, enough fuel pressure at the injectors.
i had this problem most likely your fuel pump is done and needs to be replaced
This is a complicated process and is individual to each make and model engine. Basically adjust valves, adjust turbo waste gate, adjust injection timing, ensure the pump makes correct pressure and volume, ensure the nozzles or injectors perform correctly and don't leak.
The correct phrasing is "set up correctly."
Perhaps when the word "Harley" is spelled correctly - the answer may be provided.
If the fuel injectors on your 1986 Pontiac Fiero are not squirting gas, first check the fuel pump to ensure it’s functioning properly and delivering fuel to the injectors. Next, inspect the fuel pressure regulator and the fuel filter for blockages or failures. Additionally, verify that the electrical connections and grounds to the injectors are secure and that the engine control module (ECM) is sending the correct signals. If everything checks out, consider testing or replacing the injectors themselves.
"correctly"
Yes, advertise is spelled correctly - you are correct !.
Correct is the adjective; correctly is the adverb.
If your Honda CRX is running too lean, you can address the issue by checking and adjusting the fuel pressure. Start by inspecting the fuel pump, fuel filter, and fuel injectors for any clogs or malfunctions. If those components are functioning properly, you may need to adjust the fuel pressure regulator to ensure it provides adequate pressure. Additionally, consider checking for vacuum leaks and ensuring that the engine management system is functioning correctly, as these factors can also contribute to a lean condition.
One source cites: 30 lbs at idle, 35-40 lbs in normal operationIf the fuel pressure is not at least 45 lbs it will not fire the injectors. It should run approx 60 lbs.