Either a fuse is blown (which I doubt)both bulbs,blown(which I doubt)or the turn-signal harness that runs through the steeing column.OR the Brake Light Switch that the Brake pedal operates that is under the dash.
I own a ford f150 and my tail lights are not working, but my brake work. What could wire or what could be causing that.
i cannot get the brake lights to work
brake switch ???
It burnt out i think he..... also try your fuse. check on fuse door and see which one is for the lights
Try replacing the hazard flasher. If that does not work, double-check to see that you have the proper bulbs and fuses installed for the brake lamp circuit.
Believe it or not, I have had to disconnect the cig lighter in order for the tail lights to work. Sounds far fetched but it does work!
fuse, bulbs
BAD BRAKE LIGHT SWITCH AT TOP OF BRAKE PEDAL
use a test light or a multimeter to check for power at the tail lights, check bulbs.
check the fuse for the brake lights, they have thier own. also check the brake light switch at the at the top of the brake petal
Blown fuse or bad brake light switch?
The most likely cause is a bad brake light switch (if none of the brake lights illuminate) but if its only one of the brake lights, try changing the bulb. Even if they still work as running or turn lights because they have a double filament and may still work partially, but not as brake lights.