AGP was created specifically for graphics cards, allowing them a shorter path to the CPU to make them more efficient. Unfortunately, PCI-E technology progressed faster and little was done to the AGP slot, so manufacturers moved away from AGP as the PCI technology surpassed it. AGP had the potential to be much better because it was much more intigrated with the CPU
PCI-X is legacy slot and it's not used anymore in modern computers. Video card is necessary if you want to "command" your computer through visual interface - monitor.
Installing a Video Card can be a frustrating operation. The first step is inserting it into an upgrade, or PCI Slot. Your computer may have varying types of PCI slots. Once that is done it may need to be connected to the power supply of your computer. Once it is connected you will want to hook your Computer Monitor up to the video "out" slot.
NO. If you have a pci-x slot, probably it is a server, and you want to upgrade your graphics card, you can buy a PCI card and plug it into your PCI-X slot. It should work probably.
AGP is a short for accelerated graphics port. Old computers (well - this depends on how long you have been involved with computers ;-)) have usually one AGP slot which is intended for the use of a graphic adapter. For more information you might want to consult Wikipedia
If you mean you want to use a graphic card and not your onboard graphics , then yes. But you don't touch the chip, when you install a card into the slot, and remove your onboard graphic drivers, then install your card drivers, then you will be using the card. Most cards will tell you how to install the card and when to uninstall drivers and when to install them. Almost all motherboards have a slot that can run a graphics card. Just make sure its better than your onboard or you will be wasting your time.
Expansion Slot is just like port into which expansion card can be inserted. In otherwords port is female and card is male.
You don't need the adaptor ! The Corby has a micro SD card slot. Simply insert the micro SD card into the slot, and you're all set. The adaptor is only needed if you want to use the micro card in a normal SD slot. In which case, you insert the card into the adapter - and slide the adapter into the full-size slot.
You will have to buy an SD Card (you can get them cheaply on amazon.com, amazon.co.uk or any computer shop that you know of). Connect the SD card to your computer and find the video that you want to store onto your Wii. Visit www.media-convert.com and upload your video. Click where it says output format and click Nintendo Wii. Click the convert button and transfer the converted video to your SD card. Slot the SD Card into the place where the 'Sync' button is and go to the Photo Channel to watch the video.
That would depend greatly as to how far back do you want to go? Video Cards (NVIDIA, ATI, to name a couple etc), Video Capture Card, ATI Video Cards, PCI Video Card ... are just a few of the types, not to mention the various models of each card that exists.
Slot the card into the PC (either in a dedicated card slot - or via USB card reader). Open the folder where you want the photos to go. Open the memory card (probably shows up as E or F drive). highlight the pictures you want to move - then just drag & drop them to the destination folder.
This means that the game you're trying to play, is not compatible with your video card. You might want to buy a new one.
just hit options then move it to memory card and select the slot you want it to be in.