it will provide you with a high pressure. It can reach 200 bar and its use for high viscosity liquids.
Yes you can but if you want to you can use a bike pump and pump air in to your belly to get the bigger bloat . If you still want to use your mouth then you can take a deep breath or small one then drink a liquid right after then swallow many times.
Methods: using a pump, a liquid syphon, a funnel, pipettes, free flowing etc.
I think oil is not a solid. It does not have definite volume.It is a Liquid.
You need a funnel in the laboratory. In industry an adequate pump is necessary.
When a liquid such as juice seperates, it looks like it has three layers; a foamy , an opaque and a transparent layer. A single gear juicer could prevent the juice from seperating.
GEAR
to pump out liquid or gas in higher quantity
A gear pump uses the meshing of gears to pump fluid by displacement.[1] They are one of the most common types of pumps for hydraulic fluid power applications. Gear pumps are also widely used in chemical installations to pump fluid with a certain viscosity. There are two main variations; external gear pumps which use two external spur gears, and internal gear pumps which use an external and an internal spur gear. Gear pumps are positive displacement (or fixed displacement), meaning they pump a constant amount of fluid for each revolution. Some gear pumps are designed to function as either amotor or a pump.
what type of gear pulley to use to take off oil pump on 1996 Mazda mellinia?
The oil pump is driven by the distributor drive gear on a V8.The oil pump is driven by the distributor drive gear on a V8.
Fixed
both gear pump and reciprocating pumps are positive displacement pumps.but the different is gear pump rotary type.reciprocating pump moves liner motion.the piston moves up and down in straight line.
gear pump, crescent gear pump, axial-piston pump, radial-piston pump, linear-piston pump, & vane pump Also, fuel injection pumps such as linear piston pumps and rotary piston pumps.
The oil pump is located inside the oil pan, underneath the engine. The pump is driven by a gear unit that spins with the camshaft (located higher up in the engine). As the camshaft spins, it has a gear that interacts with the gear unit for the pump which spins a shaft down to the pump to pump oil. Taking off the oil pan will expose the oil pump.
The volute of a centrifugal pump is the tank that holds the liquid being pumped. The centrifugal pump is a type of pump that uses a swirling motion to pump liquid.
The centrifugal pump is use to transfer a larger flow rate of liquid in a low pressure stage, while the booster pump is use to transmit less volume of liquid in a high pressure stage.
I am going to say yes, is it safe NO, a transfer pump is cheaper, and designed to handle diesel, some hyd. pump seal can be destroyed by diesel fuel also. The only hyd. pump I would use if you had to would be a gear type pump