0
What else can I help you with?
9 volt power supply in place of a 10 volt?
Probably ok if the new supply can produce the required amount of current in amps.
What is the amount of power consumed by a 60 watt 220 volt lamp when it is connected across 110 volt supply?
When connected to a 110-volt supply, the 60-watt 220-volt lamp will consume power that is calculated using the formula P = V^2 / R, where P is power, V is voltage, and R is resistance. Since the resistance of the lamp remains constant, the power consumption would be (110^2 / 220) = 55 watts. Thus, the lamp would consume 55 watts of power when connected across a 110-volt supply.
How do you control 110 volt circulator pump with a 24 volt thermostat?
You will need an interpose relay. This relay will have a 24 volt coil. The circuit power for the relay will come from a 120VAC to 24VAC volt transformer. The 24 VAC circuit will have the thermostat in series with the coil of the relay. Thermostat calls for heat, the coil energizes and the relay's contacts close. Your circulator pump is controlled by the relay. On selecting the relay make sure that the contact ratings can handle the full load amps of the circulator. A contact rating of 120 volts at 15 amps will do very nicely.
What does Volt-Amp mean?
A 'volt ampere' (not 'volt amp'!) is the unit for theapparent power of a load in an a.c. circuit. It is simply the product of the supply voltage and the load current.
Can you run a 570 volt motor on 480 volt three phase power supply?
No, it is not recommended to run a 570 volt motor on a 480 volt power supply. The motor is rated for a specific voltage to ensure optimal performance and prevent damage. Running the motor at a lower voltage could result in overheating and premature failure.
Can you replace a 5 volt power supply with a 10 volt power supply?
If the power supply has a 5 volt tap on the secondary side of the transformer, yes. If there is no tap and the secondary side of the power supply is only 10 volts then no, you can not substitute the higher voltage unit.
What is the number of turns in primary and secondary coil for 12 volt battery charger with 220 volt power supply?
what is the number of turns in the primary and secondary coil for 12 volt battery charger with 220 volt power supply> what is the number of turns in the primary and secondary coil for 12 volt battery charger with 220 volt power supply>
Can you plug in a 110 volt tool straight into a 240 volt power supply?
no
Can you use a 10 volt power supply for a 9 volt keyboard?
Using a 10 volt power supply for a 9 volt keyboard is not a good idea. The higher voltage will cause damage to the keyboard, burning it out and making it useless.
9 volt power supply in place of a 10 volt?
Probably ok if the new supply can produce the required amount of current in amps.
What is the amount of power consumed by a 60 watt 220 volt lamp when it is connected across 110 volt supply?
When connected to a 110-volt supply, the 60-watt 220-volt lamp will consume power that is calculated using the formula P = V^2 / R, where P is power, V is voltage, and R is resistance. Since the resistance of the lamp remains constant, the power consumption would be (110^2 / 220) = 55 watts. Thus, the lamp would consume 55 watts of power when connected across a 110-volt supply.
What does the PowerPoint Fuse control on a 2001 Ford Expedition?
The power point is the 12 volt socket to supply a 12 volt item with power
Will a 4.5 volt power supply adequately power a tascam recorder designed for 5 volts?
no no no no no no no no no no no
What are the 5 voltages produced by an ATX or BTX power supply?
+12 volt , -12 volt, + 5 volt, - 5 volt, and + 3.3 volt.
Can i wire a 7.2 volt motor up to a 18 volt battery will it just burn the motor out?
you can but if you do, you will/might: A) kill the motor,B)overload your 18 volt power supply, and C) maybe short a breaker if your power supply is also an ac to dc converter
How long does a volt last if only given a volt?
Zero time after the supply is diconnected.
Fanuc ltd power unit type a14b-0061-b001?
The A14B-0061-B001 is the 5 volt and 24 Volt Power Supply for a Fanuc 6 CNC Control. It is interchangeable with a Fanuc A14B-0061-B002 power supply.
