0
What else can I help you with?
Can you use a 14 volt makita battery charger on a 12 volt makita battery?
some makita battery charger can charger 12V 14.4V battery, I suggest you to search the details of the specific charger model number for more information.
What is secondary number?
Primary is land line Secondary is mobile
Why will sears lawn mower battery not charge?
Do you mean that you can not charge it with a battery charger or the mower will not charge it while it is running? If you can not charge it with a battery charger and you are sure that the charger works then the battery is bad. These type batteries are only good for a couple years. If the mower is not charging the battery it could be a number of things.
What is meaning of a secondary phone number?
Primary is land line Secondary is mobile
When can be current in a primary coil induce a current in a secondary coil?
Secondary current = Primary current *(Number of secondary turns /Number of primary) turnsAnswerA current isn't 'induced' into the secondary winding of a transformer. It's a voltage that is induced into the secondary winding.Provided the secondary winding is connected to a load, the secondary voltage then supplies a secondary current which is determined from (Is = Vs/Rload). The primary current then depends upon the value of the secondary current and the turns ratio.
What happen if the number of loops in the primary and secondary coils in a transformer are the same?
If the number of turns in the primary is the same as the secondary, this would be an isolation transformer. Primary and secondary voltages should match (minus the inherent transformer losses), as should the current.
Where can one purchase a battery charger for their solar car?
There are a number of places where one can purchase a battery charger for their solar car. Any good battery store will sell them. You can also purchase them online from sites such as eBay, Car Battery Chargers Central and Battery Stuff.
Difference between input and output transformer?
The 'input' side of a transformer is called its 'primary' side, whereas the 'output' side is termed its 'secondary' side. The ratio of its secondary to primary voltage is equal to the ratio of the number of turns in the secondary windings to the number of turns in the primary winding. So if, for example, a transformer's secondary winding has twice as many turns as its primary winding, then the secondary winding will produce twice the voltage applied to the primary winding.
How many turns in secondary coil in Transformer?
It depends on the type of transformer.If it is a step up transformer the number of turns in secondary side is higher than primary.Stepdown means it will have fewer number of windings on the secondary side turns when compared with the primary side.An isolation transformer has the same number of windings on the primary as the secondary.The ratio of the windings is proportional to the increase or decrease in the secondary voltage. For example, twice the windings doubles the voltage and 1/2 the windings halves the secondary voltage. The isolation transformer is denoted as 1:1 and has the same voltage on the secondary as the primary.The ratio of secondary turns to primary turns is the same as the ratio of secondary voltage to primary voltage.e.g. if the secondary to primary turns ratio is 1/10, then the secondary voltage will be one tenth of the primary voltage.
Does the ratio of voltage in a primary coil to secondary coil depends on the turn of each coil?
Yes, although the question is poorly formed. The ratio of the voltage in the primary winding to the voltage in the secondary winding is the same as the ratio of the number of turns in the primary winding to the number of turns in the secondary winding. For example, if the primary had 1200 turns with the secondary having 120 turns, and the primary voltage was 50 volts, then the secondary would be 5 volts. This is a ratio of 10:1.
Are number of turns on primary side and secondary side same in case of star star connections?
The number of primary and secondary turns, or turns ratio, determine the secondary voltage given a particular primary voltage. So, for instance, if the primary voltage is 480/277 wye, and the desired secondary voltage is 208/120 wye, the turns ratio would be 2.3:1. If the primary and secondary voltages are the same, then yes, the number of turns on primary and secondary would be the same. But if you're not converting delta to wye or vice-versa, why would you have a transformer with the same input and output voltage, other than an isolation transformer?
What is Continuous characters?
Primary locator, secondary locator, variable: - number.
