No. Per their web site, Gorilla glue isn't effective beyond 150 degrees. Wood stoves get quite a bit hotter than 150.
"Can heat be used to break the glue bond?
Heat can not be used to break the glue bond, as Gorilla Wood Glue is very heat resistant. Once cured, it is safe to heat up to 150 degrees F"
Gorilla Glue seems to form a great bond between many surfaces that regular glues cannot. Surfaces you may choose to use Gorilla Glue on include metal, stone, wood, foam, ceramics, and glass.
== == "Gorilla Glue" is the brand name of an amber colored glue designed for use with wood. Its curing is enchanced by humidity or moisture.
It's been done but epoxy would be better.
Most glues have better performance in different applications. Gorilla is good for exterior one-part bonding of wood, not so good with ceramic, metal, plastics. Titebond has many different adhesives, but is primarily oriented towards wood bonding. Mr. Sticky's adhesives are some of the best for general bonds because: 1. They stick to wet or submerged surfaces. 2. They gap fill. 3. They stick to plastics, metal, wood, ceramics and more. 4. The stay in place while curing 5. They have a long shelf life. See more at mrstickys.com gorilla glue
A wood pellet stove is simply a wood stove. However it's specialized to burn wood pellets which are made from compressed sawdust and are more convenient than firewood.
Epoxy is best for gluing glass to wood.
Gorilla Glue seems to form a great bond between many surfaces that regular glues cannot. Surfaces you may choose to use Gorilla Glue on include metal, stone, wood, foam, ceramics, and glass.
There are a few to do that. My favorites are TiteBond 2, PL200 and Gorilla Wood Glue.
== == "Gorilla Glue" is the brand name of an amber colored glue designed for use with wood. Its curing is enchanced by humidity or moisture.
It's been done but epoxy would be better.
so fair its probaly gorilla wood glue. that's stuff is stronge
A wood-glue is used in the construction process of engineered wood. There are multiple brands that provide such glue, however the most well known and trusted one is Gorilla Glue.
Some of the ingredients in Gorilla Glue are: prepolymerized MDI, diphenymethane-4.4 diisocyanate. Oh, and of course, Gorillas.
Epoxy is the best type of glue to use for wood.
100 % silicone would work.
gorilla glueANS 2 - They all work well . - Some are better in different applications.
I've checked several sites and this is what I found:Clean up any spilled or squeezed-out glue BEFORE it dries. There is no solvent known to man that will remove it once it does. Dried Gorilla Glue can be sanded, scraped, cut and otherwise shaped but, if you drop some of this stuff on your expensive wood floor and don't clean it up before it dries, you will be left with a permanent splotch! You will have to refinish the floor or other thing that you got glue on. This could potentially be a major bummer! Be careful and clean up after yourself and you'll be A-OK!* http://www99.epinions.com/review/Gorilla_Glue_42543418/content_185753702020However, you are in a better condition then most, "Glass" this is easier to work with for removing Gorilla glue, I suggest 2 items, first try soaking the glued glass in De-natured alcohol, (overnight) and try to scrape the glue off with a knife, the second way to try is use a glue debonder (hardware stores) and again scrape with a knife.