Want this question answered?
it will only fit wen u move the engain mount that the only different thing
yes its is the same engine
On a 1997 Yamaha Warrior with the original frame it is located on the frame bar underneath the motor, and a few inches in front of it. If it has a replacement frame, it may not have a vin, because on a replacement frame they are supposed to be cut out of the original frame and welded to the frame bar underneath the rear fender on the passenger side of the quad.
Where is a suzuki 1997 sidekick distributor located?"
Remove the dash. It bolted to the firewall directly behind/above the glove box.
James Suzuki was created in 1997.
it should . Two years do not differ much .
I recently swap 1996 geo/Chevy tracker engine with a 1996 suzuki engine and it worked. you have to make sure they both have G16A stamped on both engines. you MAY have to swap intake and exhaust manifold, flywheel, alternator bracket, and a few other things. just make sure they are the same engine (G16A)
Haruna Suzuki was born on 1997-04-09.
There may be clearance for the motor to fit in the frame, but you will have to modify the frame to bolt the motor into it. A main concern would be how the back of the motor lines up for the swingarm shaft to go through. Also will the carb intake boot line up with the airbox boot? A lot of questions you wouldn't know until you (or someone else) tries it.
inline fuel under the car in the frame rail up front next the motor area.
Nope