i have done this swap my self on both of my accords.... the transmission from both engines are the exact same. which means the mounts are too.
Yes, a 1993 Honda Accord DX engine can fit into a 1993 Honda Accord EX without major modifications, as both models share the same chassis and engine mounting points. However, there may be differences in components such as the intake system, exhaust, and wiring harness, so it’s advisable to check compatibility and ensure all necessary parts are accounted for during the swap.
If you have the 3.8L engine, ignition timing is controlled by the computer and cannot be altered without making changes to the computer. If you have the 3.1L engine, which has a distributor, you can set the timing as you would on any engine with a distributor.
On a 2009 Honda Accord, the starter is located on the driver's side of the engine, near the transmission. It is positioned near the bottom of the engine block, making it somewhat accessible from underneath the vehicle. To access it, you may need to remove some components or shields, depending on the specific model and engine type.
This is a bad question. The direct answer to this question is that it is not possible to delete data without making changes, since that is the definition of change. However, you can click the undo button to change things back to the way they were before you started making changes in the first place.
It is important to have a diagram when making changes to a cars engine. An engine diagram for this car can be found in its maintenance manual.
Oh, yes! The rotary engine takes unusually well to turbocharging. It is normal to get double the horsepower from the engine after turbocharging it (assuming you re-program the computer correctly), without making ANY internal engine changes at all. 500 HP is pretty typical; not bad for a 1.3 liter engine!
On a 1993 Honda Accord, the transmission dipstick is located on the driver's side of the engine bay, near the back of the engine. It is typically found near the firewall, close to the transmission itself. The dipstick is usually marked with a colored handle, making it easier to identify. To check the transmission fluid, ensure the vehicle is on level ground and the engine is running when you pull out the dipstick.
A diagram of an engine can be used as a guide when someone is making changes. A diagram for the 1989 Mighty Max engine can be found in its maintenance manual.
If this noise changes pitch when turning left or right, it's a wheel Bearing that is failing...
When making any changes to a cars engine, it is important to have the diagram. A diagram for this car's engine can be found in its maintenance manual.
When making changes to a car engine it is important to have a diagram. The 1992 Ford Mustang Engine diagram can be found in its maintenance manual.
It is important to have diagrams of a car when making changes to it. A diagram of a 1998 Toyota Celica engine can be found in its maintenance manual.