Yes. Disconnect the belt & it will run fine.
To remove the air conditioner compressor on a 1998 Grand Marquis, first, ensure the vehicle is off and disconnect the battery. Next, recover the refrigerant using a recovery machine, then remove the serpentine belt by releasing the tension on the belt tensioner. Disconnect the electrical connectors and refrigerant lines from the compressor, unbolt the compressor from its mounting bracket, and finally, remove it from the engine bay. Be sure to follow all safety and environmental guidelines when handling refrigerants.
Remove the drive belt from the air conditioner compressor. Remove the air conditioning hoses from the compressor. Remove the retaining bolts from the air conditioner compressor.
It is usually under the air filter.
This is not cost effective. It's quicker and cheaper to replace the compressor.
Should be under the air filter box.
Check the Freon with a gauge. If the pressure is too high or too low then the system will not allow the compressor to run.
low on freon compressor kicking in and out
Connect the Freon recharge hoses to the ports on the air conditioner compressor. With the hoses connected release the Freon into the compressor.
To change the AC compressor on a 1998 Grand Marquis, start by disconnecting the negative battery cable and recovering the refrigerant using a certified recovery machine. Remove the serpentine belt and disconnect the electrical connector and refrigerant lines from the compressor. Unbolt the compressor from its mounting bracket and replace it with the new unit, ensuring to replace the O-rings on the refrigerant lines. Finally, reassemble everything, recharge the AC system with refrigerant, and check for proper operation.
where the starter located on a 1997 grand marquis
no
Call a locksmith.