Will a 1997 blazer what work on a 1999 blazer????? If your talking engine, transmission, or running gear than yes. It is all the same.
The lights on the odometer on a 1999 Chevy Blazer might not work because of a burned out fuse. They might also not work if the lights are burned out.
Yes. They both use the 4L60E transmission.
the 1996 and 1997 are the same and would not work in your 2000 straight from GM
probably no because Chevy changed the type of fuel injection and it probably operates at a different pressure.
NO... It is not even close. Nothing under 1999 will work. Chevy REDESIGNED the engines and transmissions in late 1999.
When parts of a car do not work, it is important to know where its fuse is located. The horn fuse in a 1999 Chevy Blazer is located in the fuse box under the driver side dash.
Bad sending unit in the fuel tank.
Check for a blown fuse.
Yes, you can put a 1998 4WD S10 drive-train on a 1997 Chevy Blazer. However, it will not be an easy process and will require a lot of work to get it installed correctly.
Aren't they different flasher relays
No it will not work, Is it not the same.
It will if the 99 had a 4.3L in it too.
NO, It is all different. Won't work.
Yes, they both had the same transmission options.
Generally you would need to have a replacement alternator which is only around $60 and it is refurbished but a 1999 Chevy Tahoe alternator should work just as well
Will a 2000 blazer transmission fit a 1998 s 10 chevy 4x4 truck
Yes it will fit right in there and hook right up.
this is incorrect. The fuel pump is located in the fuel tank. It is a lot of work to replace. I have done it twice on my 97 blazer. Its expensive too around 300 bucks. The fuel pump on a 1997 Chevey blazer is right beside the engine
Need to go to a GM Dealer . With all you paper work they can get it for you.
If the turn signal bulbs light but will not flash, the flasher relay is defective, replace it.
Doubtful- not designed for it- Wouldn't recommend more than 10 or 15 percent ethanol mix-
If the HVAC blower motor does not work on any speeds, I would suspect the motor or the switch is bad.
Ensure relays and parking brake switch are properly functioning.
As long as the intake matches and you have the computer.