yes but you will need to swap over these parts. - 5-speed transmission - 5-speed crossmember - 5-speed driveshaft - Flywheel and MT bolts (marked "MT") - Clutch and pressure plate - Release bearing - Master and slave cylinders - Hardlines and rubber line from master to slave cyl. - Clutch pedal - Brake pedal (optional, can cut the automatic break pedal) - Boots and brackets for shifter assembly
The owners manual shows Motorcraft BXT - 59 - for manual transmission and BXT - 65 - 750 for automatic transmission
yes the engine will bolt right up.
700r4
nissan fairlady z33 manual gearbox.
The C5 Transmission
nv3500
the tremec or muncie
Manual is a AX15, automatic is a 32RH (a904)
Yes, but if you truck is not set up for manual, stick with automatic. It's too much of a hassle and too expensive to switch over to manual. If the engine is older than '79, AOD will not fit without rebuilding the engine to fit.
21mm socket or wrench
what transmission fits a 455 oldsmobile motor
none bolt right up to the engine Actually, a manual 6 speed transmission from a 2006-2007 3.9L G6 GTP bolts up perfectly to the 3800 series II (same bell housing design), and fits in the engine bay, just barely.