Yes
yes you can use a 1996 lt4 engine into a 1989 Caprice Classic, and its easy. you can mail me at:
it is located on the side of the engine block.
It's located in the top part of the carb
9-13 mpg
I know on my vortec engine the valve cover bolts are in the center of the cover and there is only 4, my racecar has vortec heads and my truck has standard stock heads with four bolts on thew corners
The rear window on a 1989 Chevrolet Caprice is replaced by prying out the retaining seals and pulling the glass out using large suction cups. New seals are installed, a bead of silicone ran along the seal, and the replacement glass popped into place.
The trunk lock on a 1989 Chevrolet Caprice is replaced by removing the retaining clip and unscrewing the bolts holding it in place. The lock can then be pulled through the opening and a new lock put in place.
Should be an 305ci. V8, some also were equipped with a 350ci. engine.
check your fuel filter and also your spark plugs.
yes, almost any will work with less than 232 duration and 454 lift
| --------- For your 1989 CHEVROLET CAPRICE: FIRING ORDER FIRING ORDER 1-8-4-3-6-5-7-2 --------- distributor rotates clockwise. you can try autozone.com and click on specs.
The 1989 Chevrolet Caprice came equipped in a 4.3L V6, three 5.0L V8 variants, and a 5.7L V8. Transmissions included the THM700R4 and TH200R4, and rear 7.5, 8.5 and 8.75 inch rear-ends.