Absolutely. If the ABS light comes on, you better check your bearings immediately. Happened to me and left me stuck in a restaurant parking lot unable to move.
It needs replaced - bearings are out of it.
No, only a problem that effects emissions will set the check engine light.
You can make music come on with a light switch the same way you can make a light bulb come on - plug a radio into the switched outlet.
There are a number of things that could make the light come on including you coolant temperature sensor, very easy part to replace, check your gauges and make sure that all of yours are working and that they are reading correctly.
you have to have a diagonstic reader to reset the light. Before you reset the light make sure there is nothing wrong with the abs or the sending unit on the abs
check to make sure your switch by you shifter marked ETS is not pressed as that will turn off your traction control and put your light on. It may be your front wheel bearings. Yes it defiinitly is the bearings it happened to me
The 2.2L and 2.4L uses a chain.a bad chain or tensioner will make the oil light come on at idle
Check gauge? Never heard of a check gauge light. If you are referring to the check engine light it is on because there is a problem with the emissions system. You need to have the ECU scanned by a professional.
It could be the ball bearings or the ball joints or the breaks but not to sure but that's what it was on mine.
You can do them back to front or front to back. Make sure the hole in the bearing lines up with the hole in the casting.
There's over 100 Chevy codes that will make it come on-you need to have code read
This depends on what bearings in what make model year and engine of car.