Does a sohc ka24de radiator fit onto a standard ka24de
Yes, all auto transmissions from 89 to 98 are the same for the 240sx and are interchangeable.
I wouldn't know eactly, but here something may be it'd be helpful. 1. Find out if KA24DE and KA24E have the same engine block. if it is, then it should fit. 2. KA24DE and KA24E Trans Auto/5-Speed Fits Perfect. 3. You can easily find out just by looking at the oilpan gasket. Check out oil pan gasket for a KA24DE and KA24E and see if they match size and shape. Bolt size are usually/most likely to be same, since it IS KA series engine.. Hope that helps... goodluck.
It depends on if it is the KA24e or the KA24DE. I know that the KA24DE has 155hp stock. However the KA24e has less. I think about 140. The difference between the two is the DE has 2 cams and the e only has 1.
140hp the ka24de has 155hp stock
of course you can. you can swap almost anything in the S-chassis. KA24E, KA24DE, SR20DET, RB20DET, RB25DET, RB26DET, LS1, 2JZ, 1JZ, the possibilities are endless. -ralphy BEATDOWN
WILL A 240SX COMPUTER BOX FIT IN A KA24E HARDBODY
Look at pictures, or know that 89-90 have a sohc ka24e and 91-98 have a dohc ka24de
Yes it will , S14 transmissions also have an unnecessary crank angle sensor on top of the bell housing you can remove.
It will fit if you cut it but as-is it will not attach to the throttle body. The 1989-1990 240's have the KA24e (single cam) and the 1991-1994 240's have the KA24de (dual cam) the throttle bodies are in different positions.
1990 is ka24e, single overhead cam, 1991 is ka24de, dual overhead cam.
Yes, some '92 240sx' came with the ka24de motor.
probably not, since 1989-1990 came with sohc ka24e motor not the dohc ka24de motor in the 1991 and newer versions