It may, it all depends on which T4 you have, but it probably will.
Header or headers are a high performance version of an exhaust manifold
If you do replace it correctly, it will work as designed.
No, they are not interchangeable.
Yes it will work. You will have to use a 4.0L exhaust manifold though.
All O2 sensors are located on the exhaust system. Start at the exhaust manifold and work your way backward.
Screwed into the exhaust system. Start at the exhaust manifold and work backward until you find one or more O2 sensors.
It is mounted in the exhaust system. Start at the exhaust manifold and work backward toward the catalytic converter. It is more than likely mounted in the exhaust manifold right at the engine. It may also be mounted where the two exhaust pipes come together.
cut the exhaust at the exhaust manifold and redirect the pipe through your airconditioning system all the way to the driverside airconditioning vent. It should work beautifully.
Screwed into the exhaust system. Start at the exhaust manifold and work your way backward toward the rear of the car, and you will find all the O2 sensors.
i found the drain plug on my 2.4L under the exhaust manifold. These cars are ridiculous to work on :(
All O2 sensors are located on the exhaust system. Start at the exhaust manifold and work your way backward, and count them.
Exhaust gases from engine spin the blades which in turn drive a turbine in the inlet manifold that forces air into a engine.