Want this question answered?
how to remove indicator stalk and cowl from Peugeot 306 lx
This is a common fault on the 307 and will require a new stalk switch module. Sorry : (
You have a faulty switch in the base of your indicator/light stalk. This switch wears out with use so the lights can flip easily to High beam from Low Beam. The fix: Replace the switch assembly and stalk.
could be the stalk (switch) this is a separate switch to the main beam but the whole stalk needs replacing
On the end of the indicator stalk, Left hand side of the steering wheel.
more than likely there is a problem with the light stalk. see if you can borrow one to plug in and check as the later ones are very expensive.
The fuse box is in the top of the glove box and its in there. Use the diagrams on the black relay cover to tell you which exact fuse it is. If you are having trouble with your indicators keep in mind it could be a faulty stalk or hazard switch.
indicator stalk problem, fit a new or good second hand one to cure
Combi Switch (combination switch) is the stalk switch used in automobiles for controlling many functions like Head lamp, turn indicator, high beam flash, cruise control, wipe and wash etc.
there is a cover behind the switch stalk clip off then you will see the plug from the wiper switch stalk unplug then to remove switch turn switch and pull out stalk switch
Hold in the oddometer reset stalk then turn the key into the on position, without starting. Then watch it count down to zero on the display and reset to 20k
By usIng left stalk( with horn on it) lower part twists.. Put it back to 0.