Will there be a ps10?

What are the various renewable source of energy that could be harnessed to enable India to tide over its energy crisis?

Renewable energy is energy generated from natural resources such as sunlight, wind, rain, tides, and geothermal heat, which are renewable (naturally replenished). In 2006, about 18% of global final energy consumption came from renewables, with 13% coming from traditional biomass, such as wood-burning and 3% from hydroelectricity. New renewables (small hydro, modern biomass, wind, solar, geothermal, and biofuels) accounted for 2.4% and are growing very rapidly.[1] The share of renewables in electricity generation is around 18%, with 15% of global electricity coming from hydroelectricity and 3.4% from new renewables.[1]Wind power is growing at the rate of 30% annually, with a worldwide installed capacity of 121,000 megawatts (MW) in 2008,[2] and is widely used in European countries and the United States.[3] The annual manufacturing output of the photovoltaics industry reached 6,900 MW in 2008,[4] and photovoltaic (PV) power stations are popular in Germany and Spain.[5] Solar thermal power stations operate in the USA and Spain, and the largest of these is the 354 MW SEGS power plant in the Mojave Desert.[6] The world's largest geothermal power installation is The Geysers in California, with a rated capacity of 750 MW.[7] Brazil has one of the largest renewable energy programs in the world, involving production of ethanol fuel from sugar cane, and ethanol now provides 18% of the country's automotive fuel.[8] Ethanol fuel is also widely available in the USA.While most renewable energy projects and production is large-scale, renewable technologies are also suited to small off-grid applications, sometimes in rural and remote areas, where energy is often crucial in human development.[9] Kenya has the world's highest household solar ownership rate with roughly 30,000 small (20-100 watt) solar power systems sold per year.[10]Some renewable energy technologies are criticized for being intermittent or unsightly, yet the renewable energy market continues to grow. Climate change concerns, coupled with high oil prices, peak oil, and increasing government support, are driving increasing renewable energy legislation, incentives and commercialization.[11] New government spending, regulation and policies helped the industry weather the 2009 economic crisis better than many other sectors.[12]Contents[hide] 1 Main forms/sources of renewable energy 1.1 Wind power1.2 Hydropower1.3 Solar energy1.4 Biofuel 1.4.1 Liquid biofuel1.4.2 Solid biomass1.4.3 Biogas1.5 Geothermal energy2 Renewable energy commercialization 2.1 Economics2.2 Growth of renewables2.3 Wind power market2.4 New generation of solar thermal plants2.5 World's largest photovoltaic power plants2.6 Use of ethanol for transportation2.7 Geothermal energy prospects2.8 Wave farms expansion2.9 Developing country markets2.10 Industry and policy trends3 Constraints and opportunities 3.1 Availability and reliability3.2 Aesthetics3.3 Environmental, social and legal considerations 3.3.1 Land area required3.3.2 Hydroelectricity3.3.3 Wind farms3.4 Longevity issues3.5 Biofuels production3.6 Diversification3.7 Competition with nuclear power4 See also5 References6 External linksMain forms/sources of renewable energyThree energy sources 2008 worldwide renewable-energy sources. Source: REN21[13]The majority of renewable energy technologies are powered by the sun. The Earth-Atmosphere system is in equilibrium such that heat radiation into space is equal to incoming solar radiation, the resulting level of energy within the Earth-Atmosphere system can roughly be described as the Earth's "climate." The hydrosphere (water) absorbs a major fraction of the incoming radiation. Most radiation is absorbed at low latitudes around the equator, but this energy is dissipated around the globe in the form of winds and ocean currents. Wave motion may play a role in the process of transferring mechanical energy between the atmosphere and the ocean through wind stress.[14] Solar energy is also responsible for the distribution of precipitation which is tapped by hydroelectric projects, and for the growth of plants used to create biofuels.Renewable energy flows involve natural phenomena such as sunlight, wind, tides and geothermal heat, as the International Energy Agency explains:[15]Renewable energy is derived from natural processes that are replenished constantly. In its various forms, it derives directly from the sun, or from heat generated deep within the earth. Included in the definition is electricity and heat generated from solar, wind, ocean, hydropower, biomass, geothermal resources, and biofuels and hydrogen derived from renewable resources.Each of these sources has unique characteristics which influence how and where they are used.Wind powerSee also: Wind power, Wind energy conversion system, List of onshore wind farms, and List of offshore wind farms Vestas V80 wind turbines Airflows can be used to run wind turbines. Modern wind turbines range from around 600 kW to 5 MW of rated power, although turbines with rated output of 1.5-3 MW have become the most common for commercial use; the power output of a turbine is a function of the cube of the wind speed, so as wind speed increases, power output increases dramatically.[16] Areas where winds are stronger and more constant, such as offshore and high altitude sites, are preferred locations for wind farms. Typical capacity factors are 20-40%, with values at the upper end of the range in particularly favourable sites.[17][18]Globally, the long-term technical potential of wind energy is believed to be five times total current global energy production, or 40 times current electricity demand. This could require large amounts of land to be used for wind turbines, particularly in areas of higher wind resources. Offshore resources experience mean wind speeds of ~90% greater than that of land, so offshore resources could contribute substantially more energy.[19] This number could also increase with higher altitude ground-based or airborne wind turbines.[20]Wind power is renewable and produces no greenhouse gases during operation, such as carbon dioxide and methane.HydropowerSee also: Hydroelectricity and Hydropower Energy in water (in the form of kinetic energy, temperature differences or salinity gradients) can be harnessed and used. Since water is about 800 times denser than air,[21][22] even a slow flowing stream of water, or moderate sea swell, can yield considerable amounts of energy. One of 3 Pelamis Wave Energy Converters in the harbor of Peniche, PortugalThere are many forms of water energy:Hydroelectric energy is a term usually reserved for large-scale hydroelectric dams. Examples are the Grand Coulee Dam in Washington State and the Akosombo Dam in Ghana.Micro hydro systems are hydroelectric power installations that typically produce up to 100 kW of power. They are often used in water rich areas as a Remote Area Power Supply (RAPS). There are many of these installations around the world, including several delivering around 50 kW in the Solomon Islands.Damless hydro systems derive kinetic energy from rivers and oceans without using a dam.Ocean energy describes all the technologies to harness energy from the ocean and the sea: Marine current power. Similar to tidal stream power, uses the kinetic energy of marine currentsOcean thermal energy conversion (OTEC) uses the temperature difference between the warmer surface of the ocean and the colder lower recesses. To this end, it employs a cyclic heat engine. OTEC has not been field-tested on a large scale.Tidal power captures energy from the tides.Wave power uses the energy in waves. Wave power machines usually take the form of floating or neutrally buoyant structures which move relative to one another or to a fixed point.Osmotic power or salinity gradient power, is the energy retrieved from the difference in the salt concentration between seawater and river water. Reverse electrodialysis (PRO) is in the research and testing phase.Vortex power is generated by placing obstacles in rivers in order to cause the formation of vortices which can then be tapped for energy.Solar energySee also: Solar energy, Solar power, and Solar thermal energy Monocrystalline solar cell In this context, "solar energy" refers to energy that is collected from sunlight. Solar energy can be applied in many ways, including to:Generate electricity using photovoltaic solar cells.Generate electricity using concentrating solar power.Generate electricity by heating trapped air which rotates turbines in a Solar updraft tower.Generate hydrogen using photoelectrochemical cells.Heat water or air for domestic hot water and space heating needs using solar-thermal panels.Heat buildings, directly, through passive solar building design.Heat foodstuffs, through solar ovens.Solar air conditioningBiofuelMain article: Biofuel Plants use photosynthesis to grow and produce biomass. Also known as biomatter, biomass can be used directly as fuel or to produce biofuels. Agriculturally produced biomass fuels, such as biodiesel, ethanol and bagasse (often a by-product of sugar cane cultivation) can be burned in internal combustion engines or boilers. Typically biofuel is burned to release its stored chemical energy. Research into more efficient methods of converting biofuels and other fuels into electricity utilizing fuel cells is an area of very active work.Liquid biofuelInformation on pump, California. Liquid biofuel is usually either a bioalcohol such as ethanol fuel or an oil such as biodiesel or straight vegetable oil. Biodiesel can be used in modern diesel vehicles with little or no modification to the engine. It can be made from waste and virgin vegetable and animal oils and fats (lipids). Virgin vegetable oils can be used in modified diesel engines. In fact the diesel engine was originally designed to run on vegetable oil rather than fossil fuel. A major benefit of biodiesel use is the reduction in net CO2 emissions, since all the carbon emitted was recently captured during the growing phase of the biomass. The use of biodiesel also reduces emission of carbon monoxide and other pollutants by 20 to 40%.[citation needed]In some areas corn, cornstalks, sugarbeets, sugar cane, and switchgrasses are grown specifically to produce ethanol (also known as grain alcohol) a liquid which can be used in internal combustion engines and fuel cells. Ethanol is being phased into the current energy infrastructure. E85 is a fuel composed of 85% ethanol and 15% gasoline that is sold to consumers. Biobutanol is being developed as an alternative to bioethanol.Another source of biofuel is sweet sorghum. It produces both food and fuel from the same crop. Some studies have shown that the crop is net energy positive ie. it produces more energy than is consumed in its production and utilization.[citation needed]Solid biomassMain article: BiomassSugar cane residue can be used as a biofuel Solid biomass is most commonly used directly as a combustible fuel, in Biomass Fuelled Power Plants producing 10-20 MJ/kg of heat. Its forms and sources include wood fuel, the biogenic portion of municipal solid waste, or the unused portion of field crops. Field crops may or may not be grown intentionally as an energy crop, and the remaining plant byproduct used as a fuel. Most types of biomass contain energy. Even cow manure still contains two-thirds of the original energy consumed by the cow. Energy harvesting via a bioreactor is a cost-effective solution to the waste disposal issues faced by the dairy farmer, and can produce enough biogas to run a farm.With current technology, it is not ideally suited for use as a transportation fuel. Most transportation vehicles require power sources with high power density, such as that provided by internal combustion engines. These engines generally require clean burning fuels, which are generally in liquid form, and to a lesser extent, compressed gaseous phase. Liquids are more portable because they can have a high energy density, and they can be pumped, which makes handling easier. Solid biomass can however be converted to hydrogen, as the Hyvolution project shows.[23]Non-transportation applications can usually tolerate the low power-density of external combustion engines, that can run directly on less-expensive solid biomass fuel, for combined heat and power. One type of biomass is wood, which has been used for millennia. Two billion people currently cook every day, and heat their homes in the winter by burning biomass, which is a major contributor to man-made climate change global warming.[citation needed] The black soot that is being carried from Asia to polar ice caps is causing them to melt faster in the summer.[citation needed] In the 19th century, wood-fired steam engines were common, contributing significantly to industrial revolution unhealthy air pollution.[citation needed] Coal is a form of biomass that has been compressed over millennia to produce a non-renewable, highly-polluting fossil fuel.Wood and its byproducts can now be converted through processes such as gasification into biofuels such as woodgas, biogas, methanol or ethanol fuel; although further development may be required to make these methods affordable and practical. Sugar cane residue, wheat chaff, corn cobs and other plant matter can be, and are, burned quite successfully. The net carbon dioxide emissions that are added to the atmosphere by this process are only from the fossil fuel that was consumed to plant, fertilize, harvest and transport the biomass.Processes to harvest biomass from short-rotation trees like poplars and willows and perennial grasses such as switchgrass, phalaris, and miscanthus, require less frequent cultivation and less nitrogen than do typical annual crops. Pelletizing miscanthus and burning it to generate electricity is being studied and may be economically viable.[24]BiogasMain articles: Biogas and Anaerobic digestion Biogas can easily be produced from current waste streams, such as paper production, sugar production, sewage, animal waste and so forth. These various waste streams have to be slurried together and allowed to naturally ferment, producing methane gas. This can be done by converting current sewage plants into biogas plants. When a biogas plant has extracted all the methane it can, the remains are sometimes more suitable as fertilizer than the original biomass.Alternatively biogas can be produced via advanced waste processing systems such as mechanical biological treatment. These systems recover the recyclable elements of household waste and process the biodegradable fraction in anaerobic digesters.Renewable natural gas is a biogas which has been upgraded to a quality similar to natural gas. By upgrading the quality to that of natural gas, it becomes possible to distribute the gas to the mass market via the existing gas grid.Geothermal energyMain articles: Geothermal energy and geothermal heat pumpKrafla Geothermal Station in northeast Iceland Geothermal energy is energy obtained by tapping the heat of the earth itself, both from kilometers deep into the Earth's crust in some places of the globe or from some meters in geothermal heat pump in all the places of the planet . It is expensive to build a power station but operating costs are low resulting in low energy costs for suitable sites. Ultimately, this energy derives from heat in the Earth's core.Three types of power plants are used to generate power from geothermal energy: dry steam, flash, and binary. Dry steam plants take steam out of fractures in the ground and use it to directly drive a turbine that spins a generator. Flash plants take hot water, usually at temperatures over 200 °C, out of the ground, and allows it to boil as it rises to the surface then separates the steam phase in steam/water separators and then runs the steam through a turbine. In binary plants, the hot water flows through heat exchangers, boiling an organic fluid that spins the turbine. The condensed steam and remaining geothermal fluid from all three types of plants are injected back into the hot rock to pick up more heat.The geothermal energy from the core of the Earth is closer to the surface in some areas than in others. Where hot underground steam or water can be tapped and brought to the surface it may be used to generate electricity. Such geothermal power sources exist in certain geologically unstable parts of the world such as Chile, Iceland, New Zealand, United States, the Philippines and Italy. The two most prominent areas for this in the United States are in the Yellowstone basin and in northern California. Iceland produced 170 MW geothermal power and heated 86% of all houses in the year 2000 through geothermal energy. Some 8000 MW of capacity is operational in total.There is also the potential to generate geothermal energy from hot dry rocks. Holes at least 3 km deep are drilled into the earth. Some of these holes pump water into the earth, while other holes pump hot water out. The heat resource consists of hot underground radiogenic granite rocks, which heat up when there is enough sediment between the rock and the earths surface. Several companies in Australia are exploring this technology.Renewable energy commercializationMain article: Renewable energy commercialization EconomicsPercentage of renewables in primary energy consumption of EU-member states in 2005. Source: Primärenergieverbrauch und erneuerbare Energien in der EU, Fig 55[25] When comparing renewable energy sources with each other and with conventional power sources, three main factors must be considered:capital costs (including, for nuclear energy, waste-disposal and decommissioning costs);operating and maintenance costs;fuel costs (for fossil-fuel and biomass sources-for wastes, these costs may actually be negative).These costs are all brought together, using discounted cash flow, here.[26] Inherently, renewables are on a decreasing cost curve, while non-renewables are on an increasing cost curve.[27] In 2009, costs are comparable among wind, nuclear, coal, and natural gas, but for CSP-concentrating solar power-and PV (photovoltaics) they are somewhat higher.There are additional costs for renewables in terms of increased grid interconnection to allow for variability of weather and load, but these have been shown in the pan-European case to be quite low-overall, wind energy costs about the same as present-day power.[28]Growth of renewablesFrom the end of 2004 to the end of 2008, solar photovoltaic (PV) capacity increased sixfold to more than 16 gigawatts (GW), wind power capacity increased 250 percent to 121 GW, and total power capacity from new renewables increased 75 percent to 280 GW. During the same period, solar heating capacity doubled to 145 gigawatts-thermal (GWth), while biodiesel production increased sixfold to 12 billion liters per year and ethanol production doubled to 67 billion liters per year.[29]Selected renewable energy indicators[2][30]Selected global indicators 2006 2007 2008 Investment in new renewable capacity (annual)63104120 billion USDExisting renewables power capacity, including large-scale hydro1,0201,0701,140 GWeExisting renewables power capacity,excluding large hydro207240280 GWeWind power capacity (existing)7494121 GWeBiomass heating~250 GWthSolar hot water/ Space heating145 GWthGeothermal heating~50 GWthEthanol production (annual)395067 billion litersCountries with policy targetsfor renewable energy use6673Wind power marketSee also: Wind farm and List of wind farms Wind power: worldwide installed capacity 1996-2008 At the end of 2008, worldwide wind farm capacity was 120,791 megawatts (MW), representing an increase of 28.8 percent during the year,[31] and wind power produced some 1.3% of global electricity consumption.[32] Wind power accounts for approximately 19% of electricity use in Denmark, 9% in Spain and Portugal, and 6% in Germany and the Republic of Ireland.[33] The United States is an important growth area and installed U.S. wind power capacity reached 25,170 MW at the end of 2008.[34] As of September 2009, the Roscoe Wind Farm (781 MW) is the world's largest wind farm.[35]As of 2009, the 209 megawatt (MW) Horns Rev 2 wind farm in Denmark is the world's largest offshore wind farm. The United Kingdom is the world's leading generator of offshore wind power, followed by Denmark.[36]New generation of solar thermal plantsSolar Towers from left: PS10, PS20. Main article: List of solar thermal power stationsLarge solar thermal power stations include the 354 MW Solar Energy Generating Systems power plant in the USA, Nevada Solar One (USA, 64 MW), Andasol 1 (Spain, 50 MW), Andasol 2 (Spain, 50 MW), PS20 solar power tower (Spain, 20 MW), and the PS10 solar power tower (Spain, 11 MW).The solar thermal power industry is growing rapidly with 1.2 GW under construction as of April 2009 and another 13.9 GW announced globally through 2014. Spain is the epicenter of solar thermal power development with 22 projects for 1,037 MW under construction, all of which are projected to come online by the end of 2010.[37] In the United States, 5,600 MW of solar thermal power projects have been announced.[38] In developing countries, three World Bank projects for integrated solar thermal/combined-cycle gas-turbine power plants in Egypt, Mexico, and Morocco have been approved.[39]World's largest photovoltaic power plantsMain article: List of photovoltaic power stations First Solar 40 MW PV Array installed by JUWI Group in Waldpolenz, Germany As of October 2009, the largest photovoltaic (PV) power plants in the world are the Olmedilla Photovoltaic Park (Spain, 60 MW), the Strasskirchen Solar Park (Germany, 54 MW), the Lieberose Photovoltaic Park (Germany, 53 MW), the Puertollano Photovoltaic Park (Spain, 50 MW), the Moura photovoltaic power station (Portugal, 46 MW), and the Waldpolenz Solar Park (Germany, 40 MW).[40]Many of these plants are integrated with agriculture and some use innovative tracking systems that follow the sun's daily path across the sky to generate more electricity than conventional fixed-mounted systems. There are no fuel costs or emissions during operation of the power stations.Topaz Solar Farm is a proposed 550 MW solar photovoltaic power plant which is to be built northwest of California Valley in the USA at a cost of over $1 billion.[41] Built on 9.5 square miles (25 km2) of ranchland,[42] the project would utilize thin-film PV panels designed and manufactured by OptiSolar in Hayward and Sacramento. The project would deliver approximately 1,100 gigawatt-hours (GW·h) annually of renewable energy. The project is expected to begin construction in 2010,[42] begin power delivery in 2011, and be fully operational by 2013.[43]High Plains Ranch is a proposed 250 MW solar photovoltaic power plant which is to be built by SunPower in the Carrizo Plain, northwest of California Valley.[43]However, when it comes to renewable energy systems and PV, it is not just large systems that matter. Building-integrated photovoltaics or "onsite" PV systems have the advantage of being matched to end use energy needs in terms of scale. So the energy is supplied close to where it is needed.[44]Use of ethanol for transportationE95 trial bus operating in São Paulo, Brazil. See also: Ethanol fuel and BioEthanol for Sustainable TransportSince the 1970s, Brazil has had an ethanol fuel program which has allowed the country to become the world's second largest producer of ethanol (after the United States) and the world's largest exporter.[45] Brazil's ethanol fuel program uses modern equipment and cheap sugar cane as feedstock, and the residual cane-waste (bagasse) is used to process heat and power.[46] There are no longer light vehicles in Brazil running on pure gasoline. By the end of 2008 there were 35,000 filling stations throughout Brazil with at least one ethanol pump.[47]Most cars on the road today in the U.S. can run on blends of up to 10% ethanol, and motor vehicle manufacturers already produce vehicles designed to run on much higher ethanol blends. Ford, DaimlerChrysler, and GM are among the automobile companies that sell "flexible-fuel" cars, trucks, and minivans that can use gasoline and ethanol blends ranging from pure gasoline up to 85% ethanol (E85). By mid-2006, there were approximately six million E85-compatible vehicles on U.S. roads.[48] The challenge is to expand the market for biofuels beyond the farm states where they have been most popular to date. Flex-fuel vehicles are assisting in this transition because they allow drivers to choose different fuels based on price and availability. The Energy Policy Act of 2005, which calls for 7.5 billion gallons of biofuels to be used annually by 2012, will also help to expand the market.[48]Geothermal energy prospectsSee also: Geothermal energy in the United States The West Ford Flat power plant is one of 21 power plants at The Geysers The Geysers, is a geothermal power field located 72 miles (116 km) north of San Francisco, California. It is the largest geothermal development in the world outputting over 750 MW.[7]Geothermal power capacity surpassed 10 GW in 2008. The United States is the world leader, with some 120 projects under development in early 2009, representing at least 5 GW. Other countries with significant recent growth in geothermal include Australia, El Salvador, Guatemala, Iceland, Indonesia, Kenya, Mexico, Nicaragua, Papua New Guinea, and Turkey. As of 2008, geothermal power development was under way in more than 40 countries.[49] Geothermal power accounted for 17 percent of the Philippines total power mix at the end of 2008, with installed capacity close to 2,000 megawatts.[50]Geothermal (ground source) heat pumps represented an estimated 30 GWth of installed capacity at the end of 2008, with other direct uses of geothermal heat (i.e., for space heating, agricultural drying and other uses) reaching an estimated 15 GWth. As of 2008, at least 76 countries use direct geothermal energy in some form.[49]Wave farms expansionMain article: Wave farm Portugal now has the world's first commercial wave farm, the Agucadoura Wave Park, officially opened in September 2008. The farm uses three Pelamis P-750 machines generating 2.25 MW.[51][52] Initial costs are put at €8.5 million. A second phase of the project is now planned to increase the installed capacity to 21MW using a further 25 Pelamis machines.[53]Funding for a wave farm in Scotland was announced in February, 2007 by the Scottish Government, at a cost of over 4 million pounds, as part of a £13 million funding packages for ocean power in Scotland. The farm will be the world's largest with a capacity of 3MW generated by four Pelamis machines.[54]Developing country marketsMain article: Renewable energy in developing countries Renewable energy can be particularly suitable for developing countries. In rural and remote areas, transmission and distribution of energy generated from fossil fuels can be difficult and expensive. Producing renewable energy locally can offer a viable alternative.[55]Renewable energy projects in many developing countries have demonstrated that renewable energy can directly contribute to poverty alleviation by providing the energy needed for creating businesses and employment. Renewable energy technologies can also make indirect contributions to alleviating poverty by providing energy for cooking, space heating, and lighting. Renewable energy can also contribute to education, by providing electricity to schools.[56]Kenya is the world leader in the number of solar power systems installed per capita (but not the number of watts added). More than 30,000 very small solar panels, each producing 12 to 30 watts, are sold in Kenya annually. For an investment of as little as $100 for the panel and wiring, the PV system can be used to charge a car battery, which can then provide power to run a fluorescent lamp or a small television for a few hours a day. More Kenyans adopt solar power every year than make connections to the country's electric grid.[57]In India, a solar loan program sponsored by UNEP has helped 100,000 people finance solar power systems in India.[58] Success in India's solar program has led to similar projects in other parts of developing world like Tunisia, Morocco, Indonesia and Mexico.Industry and policy trendsSee also: Renewable energy industry and Renewable energy policy Global revenues for solar photovoltaics, wind power, and biofuels expanded from $76 billion in 2007 to $115 billion in 2008. New global investments in clean energy technologies expanded by 4.7 percent from $148 billion in 2007 to $155 billion in 2008.[12] U.S. President Barack Obama's American Recovery and Reinvestment Act of 2009 includes more than $70 billion in direct spending and tax credits for clean energy and associated transportation programs. Clean Edge suggests that the commercialization of clean energy will help countries around the world pull out of the current economic malaise.[12]Constraints and opportunitiesCritics suggest that some renewable energy applications may create pollution, be dangerous, take up large amounts of land, or be incapable of generating a large net amount of energy. Proponents advocate the use of "appropriate renewables", also known as soft energy technologies, as these have many advantages. Availability and reliabilityFurther information: Energy security and renewable technology and Intermittent power source There is no shortage of solar-derived energy on Earth. Indeed the storages and flows of energy on the planet are very large relative to human needs.Annual photosynthesis by the vegetation in the United States is 50 billion GJ, equivalent to nearly 60% of the nation's annual fossil fuel use.The amount of solar energy intercepted by the Earth every minute is greater than the amount of energy the world uses in fossil fuels each year.The energy in the winds that blow across the United States each year could produce more than 16 billion GJ of electricity-more than one and one-half times the electricity consumed in the United States in 2000.Tropical oceans absorb 560 trillion gigajoules (GJ) of solar energy each year, equivalent to 1,600 times the world's annual energy use.A criticism of some renewable sources is their variable nature. But renewable power sources can actually be integrated into the grid system quite well, as Amory Lovins explains:Variable but forecastable renewables (wind and solar cells) are very reliable when integrated with each other, existing supplies and demand. For example, three German states were more than 30 percent wind-powered in 2007-and more than 100 percent in some months. Mostly renewable power generally needs less backup than utilities already bought to combat big coal and nuclear plants' intermittence.[59]Mark Z. Jacobson has studied how wind, water and solar technologies can provide 100 per cent of the world's energy, eliminating all fossil fuels. He advocates a "smart mix" of renewable energy sources to reliably meet electricity demand:Because the wind blows during stormy conditions when the sun does not shine and the sun often shines on calm days with little wind, combining wind and solar can go a long way toward meeting demand, especially when geothermal provides a steady base and hydroelectric can be called on to fill in the gaps.[60]The challenge of variable power supply BE be readily alleviated by certain forms of grid energy storage such as pumped-storage hydro systems, hydrogen fuel cells, thermal mass and compressed air. Batteries are still far too expensive to have any impact.From detailed studies in Europe, Dr Gregor Czisch has shown that the variable power issue can be solved by interconnecting renewable across Europe the European super grid and using only existing storage hydro. The costs of power over the lifetime of the scheme are the same as today's conventional power supplies, indicating that the capital investment is roughly the same as the cost of fuel avoided over the projects 25 year lifetime.[61]Lovins goes on to say that the unreliability of renewable energy is a myth, while the unreliability of nuclear energy is real. Of all U.S. nuclear plants built, 21 percent were abandoned and 27 percent have failed at least once. Successful reactors must close for refueling every 17 months for 39 days. And when shut in response to grid failure, they can't quickly restart. This is simply not the case for wind farms, for example.[59]Wave energy and some other renewables are continuously available. A wave energy scheme installed in Australia generates electricity with an 80% availability factor.Sustainable development and global warming groups propose a 100% Renewable Energy Source Supply, without fossil fuels and nuclear power.[62] Scientists from the University of Kassel have suggested that Germany can power itself entirely by renewable energy.[63]AestheticsBoth solar and wind generating stations have been criticized from an aesthetic point of view.[64] However, methods and opportunities exist to deploy these renewable technologies efficiently and unobtrusively: fixed solar collectors can double as noise barriers along highways, and extensive roadway, parking lot, and roof-top area is currently available; amorphous photovoltaic cells can also be used to tint windows and produce energy.[65] Advocates of renewable energy also argue that current infrastructure is less aesthetically pleasing than alternatives, but sited further from the view of most critics.[66] Environmental, social and legal considerationsWhile most renewable energy sources do not produce pollution directly, the materials, industrial processes, and construction equipment used to create them may generate waste and pollution. Some renewable energy systems actually create environmental problems. Land area requiredAnother environmental issue, particularly with biomass and biofuels, is the large amount of land required to harvest energy, which otherwise could be used for other purposes or left as undeveloped land. However, it should be pointed out that these fuels may reduce the need for harvesting non-renewable energy sources, such as vast strip-mined areas and slag mountains for coal, safety zones around nuclear plants, and hundreds of square miles being strip-mined for oil sands. These responses, however, do not account for the extremely high biodiversity and endemism of land used for ethanol crops, particularly sugar cane. In the U.S., crops grown for biofuels are the most land- and water-intensive of the renewable energy sources. In 2005, about 12% of the nation's corn crop (covering 11 million acres (45,000 km²) of farmland) was used to produce four billion gallons of ethanol-which equates to about 2% of annual U.S. gasoline consumption. For biofuels to make a much larger contribution to the energy economy, the industry will have to accelerate the development of new feedstocks, agricultural practices, and technologies that are more land and water efficient.The efficiency of biofuels production has increased significantly[48] and there are new methods to boost biofuel production,[67] although using bioelectricity, by burning the biomass to produce electricity for an electric car, increases the distance that a car can go from a hectare (about 2.5 acres) of crops by 81%, from 30,000 km to 54,000 km per year.[68] However, covering that same hectare with photovoltaics (in relatively sunless Germany or England) allows the electric car to go 3,250,000 km/year, over 100 times as far as from biofuel.[69]HydroelectricityThe major advantage of hydroelectric systems is the elimination of the cost of fuel. Other advantages include longer life than fuel-fired generation, low operating costs, and the provision of facilities for water sports. Operation of pumped-storage plants improves the daily load factor of the generation system. Overall, hydroelectric power can be far less expensive than electricity generated from fossil fuels or nuclear energy, and areas with abundant hydroelectric power attract industry. However, there are several major disadvantages of hydroelectric systems. These include: dislocation of people living where the reservoirs are planned, release of significant amounts of carbon dioxide at construction and flooding of the reservoir, disruption of aquatic ecosystems and birdlife, adverse impacts on the river environment, potential risks of sabotage and terrorism, and in rare cases catastrophic failure of the dam wall. (See Hydroelectricity article for details.)Large hydroelectric power is considered to be a renewable energy by a large number of sources, however, many groups have lobbied for it to be excluded from renewable electricity standards, any initiative to promote the use of renewable energies, and sometimes the definition of renewable itself.[70][71] Some organizations, including US federal agencies, will specifically refer to "non-hydro renewable energy".[72] Many laws exist that specifically label "small hydro" as renewable or sustainable and large hydro as not. Furthermore, the line between what is small or large also differs by governing body.[73]Hydroelectric power is now more difficult to site in developed nations because most major sites within these nations are either already being exploited or may be unavailable for other reasons such as environmental considerations.Wind farmsWind power is one of the most environmentally friendly sources of renewable energy A wind farm, when installed on agricultural land, has one of the lowest environmental impacts of all energy sources:[74] To generate the total electricity used in the UK annually, 6% of the land area would be utilised, an area of about 70 miles by 70 miles, and this would not preclude that land from being used for other purposes.[75]Wind power occupies less land area per kilowatt-hour (kWh) of electricity generated than any other energy conversion system, apart from rooftop solar energy, and is compatible with grazing and crops.It generates the energy used in its construction in just 3 months of operation, yet its operational lifetime is 20-25 years.Greenhouse gas emissions and air pollution produced by its construction are low and declining. There are no emissions or pollution produced by its operation.In substituting for base-load coal power, wind power produces a net decrease in greenhouse gas emissions and air pollution, and a net increase in biodiversity.Modern wind turbines are almost silent and rotate so slowly (in terms of revolutions per minute) that they are rarely a hazard to birds.[74]Studies of birds and offshore wind farms in Europe have found that there are very few bird collisions.[76] Several offshore wind sites in Europe have been in areas heavily used by seabirds. Improvements in wind turbine design, including a much slower rate of rotation of the blades and a smooth tower base instead of perchable lattice towers, have helped reduce bird mortality at wind farms around the world. However older smaller wind turbines may be hazardous to flying birds.[77] Birds are severely impacted by fossil fuel energy; examples include birds dying from exposure to oil spills, habitat loss from acid rain and mountaintop removal coal mining, and mercury poisoning.[78]Longevity issuesThough a source of renewable energy may last for billions of years, renewable energy infrastructure, like hydroelectric dams, will not last forever, and must be removed and replaced at some point. Events like the shifting of riverbeds, or changing weather patterns could potentially alter or even halt the function of hydroelectric dams, lowering the amount of time they are available to generate electricity. Some have claimed that geothermal being a renewable energy source depends on the rate of extraction being slow enough such that depletion does not occur. If depletion does occur, the temperature can regenerate if given a long period of non-use.[79][80]The government of Iceland states: "It should be stressed that the geothermal resource is not strictly renewable in the same sense as the hydro resource." It estimates that Iceland's geothermal energy could provide 1700 MW for over 100 years, compared to the current production of 140 MW.[81] Radioactive elements in the Earth's crust continuously decay, replenishing the heat. The International Energy Agency classifies geothermal power as renewable.[82]Biofuels productionSee also: Ethanol fuel energy balance and Cellulosic ethanol commercialization All biomass needs to go through some of these steps: it needs to be grown, collected, dried, fermented and burned. All of these steps require resources and an infrastructure.Some studies contend that ethanol is "energy negative", meaning that it takes more energy to produce than is contained in the final product.[83] However, a large number of recent studies, including a 2006 article[84] in the journal Science offer the opinion that fuels like ethanol are energy positive. Furthermore, fossil fuels also require significant energy inputs which have seldom been accounted for in the past.Additionally, ethanol is not the only product created during production, and the energy content of the by-products must also be considered. Corn is typically 66% starch and the remaining 33% is not fermented. This unfermented component is called distillers grain, which is high in fats and proteins, and makes good animal feed.[85] In Brazil, where sugar cane is used, the yield is higher, and conversion to ethanol is somewhat more energy efficient than corn. Recent developments with cellulosic ethanol production may improve yields even further.[86]According to the International Energy Agency, new biofuels technologies being developed today, notably cellulosic ethanol, could allow biofuels to play a much bigger role in the future than previously thought.[87] Cellulosic ethanol can be made from plant matter composed primarily of inedible cellulose fibers that form the stems and branches of most plants. Crop residues (such as corn stalks, wheat straw and rice straw), wood waste, and municipal solid waste are potential sources of cellulosic biomass. Dedicated energy crops, such as switchgrass, are also promising cellulose sources that can be sustainably produced in many regions of the United States.[88]The ethanol and biodiesel production industries also create jobs in plant construction, operations, and maintenance, mostly in rural communities. According to the Renewable Fuels Association, the ethanol industry created almost 154,000 U.S. jobs in 2005 alone, boosting household income by $5.7 billion. It also contributed about $3.5 billion in tax revenues at the local, state, and federal levels.[48]DiversificationThe examples and perspective in this section deal primarily with the United States and do not represent a worldwide view of the subject. Please improve this article and discuss the issue on the talk page.The U.S. electric power industry now relies on large, central power stations, including coal, natural gas, nuclear, and hydropower plants that together generate more than 95% of the nation's electricity. Over the next few decades uses of renewable energy could help to diversify the nation's bulk power supply. Already, appropriate renewable resources (which excludes large hydropower) produce 12% of northern California's electricity.[48]Although most of today's electricity comes from large, central-station power plants, new technologies offer a range of options for generating electricity nearer to where it is needed, saving on the cost of transmitting and distributing power and improving the overall efficiency and reliability of the system.[48]Improving energy efficiency represents the most immediate and often the most cost-effective way to reduce oil dependence, improve energy security, and reduce the health and environmental impact of the energy system. By reducing the total energy requirements of the economy, improved energy efficiency could make increased reliance on renewable energy sources more practical and affordable.[48]Competition with nuclear powerSee also: Nuclear power proposed as renewable energy Nuclear power continues to be considered as an alternative to fossil-fuel power sources (see Low carbon power generation), and in 1956, when the first peak oil paper was presented, nuclear energy was presented as the replacement for fossil fuels.[89] However, the prospect of increased nuclear power deployment was seriously undermined in the United States as a result of the Three Mile Island, and in the rest of the world after the Chernobyl disaster. This trend is slowly reversing, and several new nuclear reactors are scheduled for construction.[90]Physicist Bernard Cohen proposed in 1983 that uranium dissolved in seawater is effectively inexhaustible, and could therefore be considered a renewable source of energy.[91][92] However, this idea is not universally accepted, and issues such as peak uranium and uranium depletion are ongoing debates.No legislative body has yet included nuclear energy under any legal definition of "renewable energy sources" for provision of development support, and statutory and scientific definitions of renewable energies normally exclude nuclear energy

What does sola mean in science?

This article is about all uses of solar energy. For the journal, see Solar Energy Journal.Nellis Solar Power Plant in the United States, one of the largest photovoltaic power plants in North America.Renewable energyBiofuelBiomassGeothermalHydroelectricitySolar energyTidal powerWave powerWind powervteSolar energy, radiant light and heat from the sun, has been harnessed by humans since ancient times using a range of ever-evolving technologies. Solar energy technologies include solar heating, solar photovoltaics, solar thermal electricity and solar architecture, which can make considerable contributions to solving some of the most urgent problems the world now faces.[1]Solar technologies are broadly characterized as either passive solar or active solar depending on the way they capture, convert and distribute solar energy. Active solar techniques include the use of photovoltaic panels and solar thermal collectors to harness the energy. Passive solar techniques include orienting a building to the Sun, selecting materials with favorable thermal mass or light dispersing properties, and designing spaces that naturally circulate air.In 2011, the International Energy Agency said that "the development of affordable, inexhaustible and clean solar energy technologies will have huge longer-term benefits. It will increase countries' energy security through reliance on an indigenous, inexhaustible and mostly import-independent resource, enhance sustainability, reduce pollution, lower the costs of mitigating climate change, and keep fossil fuel prices lower than otherwise. These advantages are global. Hence the additional costs of the incentives for early deployment should be considered learning investments; they must be wisely spent and need to be widely shared".[1]Contents[hide] 1 Energy from the Sun2 Applications of solar technology 2.1 Architecture and urban planning2.2 Agriculture and horticulture2.3 Solar lighting2.4 Solar thermal 2.4.1 Water heating2.4.2 Heating, cooling and ventilation2.4.3 Water treatment2.4.4 Cooking2.4.5 Process heat2.5 Solar power 2.5.1 Concentrated solar power2.5.2 Photovoltaics2.6 Solar chemical2.7 Solar vehicles3 Energy storage methods4 Development, deployment and economics5 ISO Standards6 See also7 Notes8 References9 External linksEnergy from the SunMain articles: Insolation and Solar radiation About half the incoming solar energy reaches the Earth's surface.The Earth receives 174 petawatts (PW) of incoming solar radiation (insolation) at the upper atmosphere.[2] Approximately 30% is reflected back to space while the rest is absorbed by clouds, oceans and land masses. The spectrum of solar light at the Earth's surface is mostly spread across the visible and near-infrared ranges with a small part in the near-ultraviolet.[3]Earth's land surface, oceans and atmosphere absorb solar radiation, and this raises their temperature. Warm air containing evaporated water from the oceans rises, causing atmospheric circulation or convection. When the air reaches a high altitude, where the temperature is low, water vapor condenses into clouds, which rain onto the Earth's surface, completing the water cycle. The latent heat of water condensation amplifies convection, producing atmospheric phenomena such as wind, cyclones and anti-cyclones.[4] Sunlight absorbed by the oceans and land masses keeps the surface at an average temperature of 14 °C.[5] By photosynthesis green plants convert solar energy into chemical energy, which produces food, wood and the biomass from which fossil fuels are derived.[6]Yearly Solar fluxes & Human Energy ConsumptionSolar3,850,000 EJ[7]Wind2,250 EJ[8]Biomass3,000 EJ[9]Primary energy use (2005)487 EJ[10]Electricity (2005)56.7 EJ[11]The total solar energy absorbed by Earth's atmosphere, oceans and land masses is approximately 3,850,000 exajoules (EJ) per year.[7] In 2002, this was more energy in one hour than the world used in one year.[12][13] Photosynthesis captures approximately 3,000 EJ per year in biomass.[9] The amount of solar energy reaching the surface of the planet is so vast that in one year it is about twice as much as will ever be obtained from all of the Earth's non-renewable resources of coal, oil, natural gas, and mined uranium combined.[14]Solar energy can be harnessed in different levels around the world. Depending on a geographical location the closer to the equator the more "potential" solar energy is available.[15]Applications of solar technologyAverage insolation showing land area (small black dots) required to replace the world primary energy supply with solar electricity. 18 TW is 568 Exajoule (EJ) per year. Insolation for most people is from 150 to 300 W/m2 or 3.5 to 7.0 kWh/m2/day. Solar energy refers primarily to the use of solar radiation for practical ends. However, all renewable energies, other than geothermal and tidal, derive their energy from the sun.Solar technologies are broadly characterized as either passive or active depending on the way they capture, convert and distribute sunlight. Active solar techniques use photovoltaic panels, pumps, and fans to convert sunlight into useful outputs. Passive solar techniques include selecting materials with favorable thermal properties, designing spaces that naturally circulate air, and referencing the position of a building to the Sun. Active solar technologies increase the supply of energy and are considered supply side technologies, while passive solar technologies reduce the need for alternate resources and are generally considered demand side technologies.[16]Architecture and urban planningMain articles: Passive solar building design and Urban heat island Darmstadt University of Technology in Germany won the 2007 Solar Decathlon in Washington, D.C. with this passive house designed specifically for the humid and hot subtropical climate.[17]Sunlight has influenced building design since the beginning of architectural history.[18] Advanced solar architecture and urban planning methods were first employed by the Greeks and Chinese, who oriented their buildings toward the south to provide light and warmth.[19]The common features of passive solar architecture are orientation relative to the Sun, compact proportion (a low surface area to volume ratio), selective shading (overhangs) and thermal mass.[18] When these features are tailored to the local climate and environment they can produce well-lit spaces that stay in a comfortable temperature range. Socrates' Megaron House is a classic example of passive solar design.[18] The most recent approaches to solar design use computer modeling tying together solar lighting, heating and ventilation systems in an integrated solar design package.[20] Active solar equipment such as pumps, fans and switchable windows can complement passive design and improve system performance.Urban heat islands (UHI) are metropolitan areas with higher temperatures than that of the surrounding environment. The higher temperatures are a result of increased absorption of the Solar light by urban materials such as asphalt and concrete, which have lower albedos and higher heat capacities than those in the natural environment. A straightforward method of counteracting the UHI effect is to paint buildings and roads white and plant trees. Using these methods, a hypothetical "cool communities" program in Los Angeles has projected that urban temperatures could be reduced by approximately 3 °C at an estimated cost of US$1 billion, giving estimated total annual benefits of US$530 million from reduced air-conditioning costs and healthcare savings.[21]Agriculture and horticultureGreenhouses like these in the Westland municipality of the Netherlands grow vegetables, fruits and flowers. Agriculture and horticulture seek to optimize the capture of solar energy in order to optimize the productivity of plants. Techniques such as timed planting cycles, tailored row orientation, staggered heights between rows and the mixing of plant varieties can improve crop yields.[22][23] While sunlight is generally considered a plentiful resource, the exceptions highlight the importance of solar energy to agriculture. During the short growing seasons of the Little Ice Age, French and English farmers employed fruit walls to maximize the collection of solar energy. These walls acted as thermal masses and accelerated ripening by keeping plants warm. Early fruit walls were built perpendicular to the ground and facing south, but over time, sloping walls were developed to make better use of sunlight. In 1699, Nicolas Fatio de Duillier even suggested using a tracking mechanism which could pivot to follow the Sun.[24] Applications of solar energy in agriculture aside from growing crops include pumping water, drying crops, brooding chicks and drying chicken manure.[25][26] More recently the technology has been embraced by vinters, who use the energy generated by solar panels to power grape presses.[27]Greenhouses convert solar light to heat, enabling year-round production and the growth (in enclosed environments) of specialty crops and other plants not naturally suited to the local climate. Primitive greenhouses were first used during Roman times to produce cucumbers year-round for the Roman emperor Tiberius.[28] The first modern greenhouses were built in Europe in the 16th century to keep exotic plants brought back from explorations abroad.[29] Greenhouses remain an important part of horticulture today, and plastic transparent materials have also been used to similar effect in polytunnels and row covers.Solar lightingDaylighting features such as this oculus at the top of the Pantheon, in Rome, Italy have been in use since antiquity. The history of lighting is dominated by the use of natural light. The Romans recognized a right to light as early as the 6th century and English law echoed these judgments with the Prescription Act of 1832.[30][31] In the 20th century artificial lighting became the main source of interior illumination but daylighting techniques and hybrid solar lighting solutions are ways to reduce energy consumption.Daylighting systems collect and distribute sunlight to provide interior illumination. This passive technology directly offsets energy use by replacing artificial lighting, and indirectly offsets non-solar energy use by reducing the need for air-conditioning.[32] Although difficult to quantify, the use of natural lighting also offers physiological and psychological benefits compared to artificial lighting.[32] Daylighting design implies careful selection of window types, sizes and orientation; exterior shading devices may be considered as well. Individual features include sawtooth roofs, clerestory windows, light shelves, skylights and light tubes. They may be incorporated into existing structures, but are most effective when integrated into a solar design package that accounts for factors such as glare, heat flux and time-of-use. When daylighting features are properly implemented they can reduce lighting-related energy requirements by 25%.[33]Hybrid solar lighting is an active solar method of providing interior illumination. HSL systems collect sunlight using focusing mirrors that track the Sun and use optical fibers to transmit it inside the building to supplement conventional lighting. In single-story applications these systems are able to transmit 50% of the direct sunlight received.[34]Solar lights that charge during the day and light up at dusk are a common sight along walkways.[35] Solar-charged lanterns have become popular in developing countries where they provide a safer and cheaper alternative to kerosene lamps.[36]Although daylight saving time is promoted as a way to use sunlight to save energy, recent research has been limited and reports contradictory results: several studies report savings, but just as many suggest no effect or even a net loss, particularly when gasoline consumption is taken into account. Electricity use is greatly affected by geography, climate and economics, making it hard to generalize from single studies.[37]Solar thermalMain article: Solar thermal energy Solar thermal technologies can be used for water heating, space heating, space cooling and process heat generation.[38]Water heatingMain articles: Solar hot water and Solar combisystem Solar water heaters facing the Sun to maximize gain.Solar hot water systems use sunlight to heat water. In low geographical latitudes (below 40 degrees) from 60 to 70% of the domestic hot water use with temperatures up to 60 °C can be provided by solar heating systems.[39] The most common types of solar water heaters are evacuated tube collectors (44%) and glazed flat plate collectors (34%) generally used for domestic hot water; and unglazed plastic collectors (21%) used mainly to heat swimming pools.[40]As of 2007, the total installed capacity of solar hot water systems is approximately 154 GW.[41] China is the world leader in their deployment with 70 GW installed as of 2006 and a long term goal of 210 GW by 2020.[42] Israel and Cyprus are the per capita leaders in the use of solar hot water systems with over 90% of homes using them.[43] In the United States, Canada and Australia heating swimming pools is the dominant application of solar hot water with an installed capacity of 18 GW as of 2005.[16]Heating, cooling and ventilationMain articles: Solar heating, Thermal mass, Solar chimney, and Solar air conditioning Solar House #1 of Massachusetts Institute of Technology in the United States, built in 1939, used seasonal thermal storage for year-round heating.In the United States, heating, ventilation and air conditioning (HVAC) systems account for 30% (4.65 EJ) of the energy used in commercial buildings and nearly 50% (10.1 EJ) of the energy used in residential buildings.[33][44] Solar heating, cooling and ventilation technologies can be used to offset a portion of this energy.Thermal mass is any material that can be used to store heat-heat from the Sun in the case of solar energy. Common thermal mass materials include stone, cement and water. Historically they have been used in arid climates or warm temperate regions to keep buildings cool by absorbing solar energy during the day and radiating stored heat to the cooler atmosphere at night. However they can be used in cold temperate areas to maintain warmth as well. The size and placement of thermal mass depend on several factors such as climate, daylighting and shading conditions. When properly incorporated, thermal mass maintains space temperatures in a comfortable range and reduces the need for auxiliary heating and cooling equipment.[45]A solar chimney (or thermal chimney, in this context) is a passive solar ventilation system composed of a vertical shaft connecting the interior and exterior of a building. As the chimney warms, the air inside is heated causing an updraft that pulls air through the building. Performance can be improved by using glazing and thermal mass materials[46] in a way that mimics greenhouses.Deciduous trees and plants have been promoted as a means of controlling solar heating and cooling. When planted on the southern side of a building, their leaves provide shade during the summer, while the bare limbs allow light to pass during the winter.[47] Since bare, leafless trees shade 1/3 to 1/2 of incident solar radiation, there is a balance between the benefits of summer shading and the corresponding loss of winter heating.[48] In climates with significant heating loads, deciduous trees should not be planted on the southern side of a building because they will interfere with winter solar availability. They can, however, be used on the east and west sides to provide a degree of summer shading without appreciably affecting winter solar gain.[49]Water treatmentMain articles: Solar still, Solar water disinfection, Solar desalination, and Solar Powered Desalination Unit Solar water disinfection in IndonesiaSmall scale solar powered sewerage treatment plant.Solar distillation can be used to make saline or brackish water potable. The first recorded instance of this was by 16th century Arab alchemists.[50] A large-scale solar distillation project was first constructed in 1872 in the Chilean mining town of Las Salinas.[51] The plant, which had solar collection area of 4,700 m2, could produce up to 22,700 L per day and operated for 40 years.[51] Individual still designs include single-slope, double-slope (or greenhouse type), vertical, conical, inverted absorber, multi-wick, and multiple effect.[50] These stills can operate in passive, active, or hybrid modes. Double-slope stills are the most economical for decentralized domestic purposes, while active multiple effect units are more suitable for large-scale applications.[50]Solar water disinfection (SODIS) involves exposing water-filled plastic polyethylene terephthalate (PET) bottles to sunlight for several hours.[52] Exposure times vary depending on weather and climate from a minimum of six hours to two days during fully overcast conditions.[53] It is recommended by the World Health Organization as a viable method for household water treatment and safe storage.[54] Over two million people in developing countries use this method for their daily drinking water.[53]Solar energy may be used in a water stabilisation pond to treat waste water without chemicals or electricity. A further environmental advantage is that algae grow in such ponds and consume carbon dioxide in photosynthesis, although algae may produce toxic chemicals that make the water unusable.[55][56]CookingMain article: Solar cooker The Solar Bowl in Auroville, India, concentrates sunlight on a movable receiver to produce steam for cooking.Solar cookers use sunlight for cooking, drying and pasteurization. They can be grouped into three broad categories: box cookers, panel cookers and reflector cookers.[57] The simplest solar cooker is the box cooker first built by Horace de Saussure in 1767.[58] A basic box cooker consists of an insulated container with a transparent lid. It can be used effectively with partially overcast skies and will typically reach temperatures of 90-150 °C.[59] Panel cookers use a reflective panel to direct sunlight onto an insulated container and reach temperatures comparable to box cookers. Reflector cookers use various concentrating geometries (dish, trough, Fresnel mirrors) to focus light on a cooking container. These cookers reach temperatures of 315 °C and above but require direct light to function properly and must be repositioned to track the Sun.[60]The solar bowl is a concentrating technology employed by the Solar Kitchen in Auroville, Pondicherry, India, where a stationary spherical reflector focuses light along a line perpendicular to the sphere's interior surface, and a computer control system moves the receiver to intersect this line. Steam is produced in the receiver at temperatures reaching 150 °C and then used for process heat in the kitchen.[61]A reflector developed by Wolfgang Scheffler in 1986 is used in many solar kitchens. Scheffler reflectors are flexible parabolic dishes that combine aspects of trough and power tower concentrators. Polar tracking is used to follow the Sun's daily course and the curvature of the reflector is adjusted for seasonal variations in the incident angle of sunlight. These reflectors can reach temperatures of 450-650 °C and have a fixed focal point, which simplifies cooking.[62] The world's largest Scheffler reflector system in Abu Road, Rajasthan, India is capable of cooking up to 35,000 meals a day.[63] As of 2008, over 2,000 large Scheffler cookers had been built worldwide.[64]Process heatMain articles: Solar pond, Salt evaporation pond, and Solar furnace Solar concentrating technologies such as parabolic dish, trough and Scheffler reflectors can provide process heat for commercial and industrial applications. The first commercial system was the Solar Total Energy Project (STEP) in Shenandoah, Georgia, USA where a field of 114 parabolic dishes provided 50% of the process heating, air conditioning and electrical requirements for a clothing factory. This grid-connected cogeneration system provided 400 kW of electricity plus thermal energy in the form of 401 kW steam and 468 kW chilled water, and had a one hour peak load thermal storage.[65]Evaporation ponds are shallow pools that concentrate dissolved solids through evaporation. The use of evaporation ponds to obtain salt from sea water is one of the oldest applications of solar energy. Modern uses include concentrating brine solutions used in leach mining and removing dissolved solids from waste streams.[66]Clothes lines, clotheshorses, and clothes racks dry clothes through evaporation by wind and sunlight without consuming electricity or gas. In some states of the United States legislation protects the "right to dry" clothes.[67]Unglazed transpired collectors (UTC) are perforated sun-facing walls used for preheating ventilation air. UTCs can raise the incoming air temperature up to 22 °C and deliver outlet temperatures of 45-60 °C.[68] The short payback period of transpired collectors (3 to 12 years) makes them a more cost-effective alternative than glazed collection systems.[68] As of 2003, over 80 systems with a combined collector area of 35,000 m2 had been installed worldwide, including an 860 m2 collector in Costa Rica used for drying coffee beans and a 1,300 m2 collector in Coimbatore, India used for drying marigolds.[26]Solar powerMain article: Solar power The PS10 concentrates sunlight from a field of heliostats on a central tower.Solar power is the conversion of sunlight into electricity, either directly using photovoltaics (PV), or indirectly using concentrated solar power (CSP). CSP systems use lenses or mirrors and tracking systems to focus a large area of sunlight into a small beam. PV converts light into electric current using the photoelectric effect.Commercial CSP plants were first developed in the 1980s. Since 1985 the eventually 354 MW SEGS CSP installation, in the Mojave Desert of California, is the largest solar power plant in the world. Other large CSP plants include the Solnova Solar Power Station (150 MW) and the Andasol solar power station (100 MW), both in Spain. The Agua Caliente Solar Project, in the United States, and the 214 MW Charanka Solar Park in India, are the world's largest photovoltaic plants.Concentrated solar powerSee also: Concentrated solar power Concentrating Solar Power (CSP) systems use lenses or mirrors and tracking systems to focus a large area of sunlight into a small beam. The concentrated heat is then used as a heat source for a conventional power plant. A wide range of concentrating technologies exists; the most developed are the parabolic trough, the concentrating linear fresnel reflector, the Stirling dish and the solar power tower. Various techniques are used to track the Sun and focus light. In all of these systems a working fluid is heated by the concentrated sunlight, and is then used for power generation or energy storage.[69]Photovoltaics80 MW Okhotnykovo Solar Park in Ukraine. NREL compilation of best research solar cell efficiencies from 1976 to 2012Main article: PhotovoltaicsA solar cell, or photovoltaic cell (PV), is a device that converts light into electric current using the photoelectric effect. The first solar cell was constructed by Charles Fritts in the 1880s.[70] In 1931 a German engineer, Dr Bruno Lange, developed a photo cell using silver selenide in place of copper oxide.[71] Although the prototype selenium cells converted less than 1% of incident light into electricity, both Ernst Werner von Siemens and James Clerk Maxwell recognized the importance of this discovery.[72] Following the work of Russell Ohl in the 1940s, researchers Gerald Pearson, Calvin Fuller and Daryl Chapin created the silicon solar cell in 1954.[73] These early solar cells cost 286 USD/watt and reached efficiencies of 4.5-6%.[74]Solar chemicalMain article: Solar chemical Solar chemical processes use solar energy to drive chemical reactions. These processes offset energy that would otherwise come from a fossil fuel source and can also convert solar energy into storable and transportable fuels. Solar induced chemical reactions can be divided into thermochemical or photochemical.[75] A variety of fuels can be produced by artificial photosynthesis.[76] The multielectron catalytic chemistry involved in making carbon-based fuels (such as methanol) from reduction of carbon dioxide is challenging; a feasible alternative is hydrogen production from protons, though use of water as the source of electrons (as plants do) requires mastering the multielectron oxidation of two water molecules to molecular oxygen.[77] Some have envisaged working solar fuel plants in coastal metropolitan areas by 2050- the splitting of sea water providing hydrogen to be run through adjacent fuel-cell electric power plants and the pure water by-product going directly into the municipal water system.[78]Hydrogen production technologies been a significant area of solar chemical research since the 1970s. Aside from electrolysis driven by photovoltaic or photochemical cells, several thermochemical processes have also been explored. One such route uses concentrators to split water into oxygen and hydrogen at high temperatures (2300-2600 °C).[79] Another approach uses the heat from solar concentrators to drive the steam reformation of natural gas thereby increasing the overall hydrogen yield compared to conventional reforming methods.[80] Thermochemical cycles characterized by the decomposition and regeneration of reactants present another avenue for hydrogen production. The Solzinc process under development at the Weizmann Institute uses a 1 MW solar furnace to decompose zinc oxide (ZnO) at temperatures above 1200 °C. This initial reaction produces pure zinc, which can subsequently be reacted with water to produce hydrogen.[81]Solar vehiclesMain articles: Solar vehicle, Solar-charged vehicle, Electric boat, and Solar balloon Australia hosts the World Solar Challenge where solar cars like the Nuna3 race through a 3,021 km (1,877 mi) course from Darwin to Adelaide.Development of a solar powered car has been an engineering goal since the 1980s. The World Solar Challenge is a biannual solar-powered car race, where teams from universities and enterprises compete over 3,021 kilometres (1,877 mi) across central Australia from Darwin to Adelaide. In 1987, when it was founded, the winner's average speed was 67 kilometres per hour (42 mph) and by 2007 the winner's average speed had improved to 90.87 kilometres per hour (56.46 mph).[82] The North American Solar Challenge and the planned South African Solar Challenge are comparable competitions that reflect an international interest in the engineering and development of solar powered vehicles.[83][84]Some vehicles use solar panels for auxiliary power, such as for air conditioning, to keep the interior cool, thus reducing fuel consumption.[85][86]In 1975, the first practical solar boat was constructed in England.[87] By 1995, passenger boats incorporating PV panels began appearing and are now used extensively.[88] In 1996, Kenichi Horie made the first solar powered crossing of the Pacific Ocean, and the sun21 catamaran made the first solar powered crossing of the Atlantic Ocean in the winter of 2006-2007.[89] There are plans to circumnavigate the globe in 2010.[90]Helios UAV in solar powered flight.In 1974, the unmanned AstroFlight Sunrise plane made the first solar flight. On 29 April 1979, the Solar Riser made the first flight in a solar powered, fully controlled, man carrying flying machine, reaching an altitude of 40 feet (12 m). In 1980, the Gossamer Penguin made the first piloted flights powered solely by photovoltaics. This was quickly followed by the Solar Challenger which crossed the English Channel in July 1981. In 1990 Eric Scott Raymond in 21 hops flew from California to North Carolina using solar power.[91] Developments then turned back to unmanned aerial vehicles (UAV) with the Pathfinder (1997) and subsequent designs, culminating in the Helios which set the altitude record for a non-rocket-propelled aircraft at 29,524 metres (96,864 ft) in 2001.[92] The Zephyr, developed by BAE Systems, is the latest in a line of record-breaking solar aircraft, making a 54-hour flight in 2007, and month-long flights are envisioned by 2010.[93]A solar balloon is a black balloon that is filled with ordinary air. As sunlight shines on the balloon, the air inside is heated and expands causing an upward buoyancy force, much like an artificially heated hot air balloon. Some solar balloons are large enough for human flight, but usage is generally limited to the toy market as the surface-area to payload-weight ratio is relatively high.[94]Energy storage methodsMain articles: Thermal mass, Thermal energy storage, Phase change material, Grid energy storage, and V2G Solar Two's thermal storage system generated electricity during cloudy weather and at night.Solar energy is not available at night, and energy storage is an important issue because modern energy systems usually assume continuous availability of energy.[95]Thermal mass systems can store solar energy in the form of heat at domestically useful temperatures for daily or seasonal durations. Thermal storage systems generally use readily available materials with high specific heat capacities such as water, earth and stone. Well-designed systems can lower peak demand, shift time-of-use to off-peak hours and reduce overall heating and cooling requirements.[96][97]Phase change materials such as paraffin wax and Glauber's salt are another thermal storage media. These materials are inexpensive, readily available, and can deliver domestically useful temperatures (approximately 64 °C). The "Dover House" (in Dover, Massachusetts) was the first to use a Glauber's salt heating system, in 1948.[98]Solar energy can be stored at high temperatures using molten salts. Salts are an effective storage medium because they are low-cost, have a high specific heat capacity and can deliver heat at temperatures compatible with conventional power systems. The Solar Two used this method of energy storage, allowing it to store 1.44 TJ in its 68 m3 storage tank with an annual storage efficiency of about 99%.[99]Off-grid PV systems have traditionally used rechargeable batteries to store excess electricity. With grid-tied systems, excess electricity can be sent to the transmission grid, while standard grid electricity can be used to meet shortfalls. Net metering programs give household systems a credit for any electricity they deliver to the grid. This is often legally handled by 'rolling back' the meter whenever the home produces more electricity than it consumes. If the net electricity use is below zero, the utility is required to pay for the extra at the same rate as they charge consumers.[100] Other legal approaches involve the use of two meters, to measure electricity consumed vs. electricity produced. This is less common due to the increased installation cost of the second meter.Pumped-storage hydroelectricity stores energy in the form of water pumped when energy is available from a lower elevation reservoir to a higher elevation one. The energy is recovered when demand is high by releasing the water to run through a hydroelectric power generator.[101]Development, deployment and economicsMain article: Deployment of solar power to energy grids See also: Cost of electricity by sourceBeginning with the surge in coal use which accompanied the Industrial Revolution, energy consumption has steadily transitioned from wood and biomass to fossil fuels. The early development of solar technologies starting in the 1860s was driven by an expectation that coal would soon become scarce. However development of solar technologies stagnated in the early 20th century in the face of the increasing availability, economy, and utility of coal and petroleum.[102]The 1973 oil embargo and 1979 energy crisis caused a reorganization of energy policies around the world and brought renewed attention to developing solar technologies.[103][104] Deployment strategies focused on incentive programs such as the Federal Photovoltaic Utilization Program in the US and the Sunshine Program in Japan. Other efforts included the formation of research facilities in the US (SERI, now NREL), Japan (NEDO), and Germany (Fraunhofer Institute for Solar Energy Systems ISE).[105]Commercial solar water heaters began appearing in the United States in the 1890s.[106] These systems saw increasing use until the 1920s but were gradually replaced by cheaper and more reliable heating fuels.[107] As with photovoltaics, solar water heating attracted renewed attention as a result of the oil crises in the 1970s but interest subsided in the 1980s due to falling petroleum prices. Development in the solar water heating sector progressed steadily throughout the 1990s and growth rates have averaged 20% per year since 1999.[41] Although generally underestimated, solar water heating and cooling is by far the most widely deployed solar technology with an estimated capacity of 154 GW as of 2007.[41]The International Energy Agency has said that solar energy can make considerable contributions to solving some of the most urgent problems the world now faces:[1]The development of affordable, inexhaustible and clean solar energy technologies will have huge longer-term benefits. It will increase countries' energy security through reliance on an indigenous, inexhaustible and mostly import-independent resource, enhance sustainability, reduce pollution, lower the costs of mitigating climate change, and keep fossil fuel prices lower than otherwise. These advantages are global. Hence the additional costs of the incentives for early deployment should be considered learning investments; they must be wisely spent and need to be widely shared.[1]In 2011, the International Energy Agency said that solar energy technologies such as photovoltaic panels, solar water heaters and power stations built with mirrors could provide a third of the world's energy by 2060 if politicians commit to limiting climate change. The energy from the sun could play a key role in de-carbonizing the global economy alongside improvements in energy efficiency and imposing costs on greenhouse gas emitters. "The strength of solar is the incredible variety and flexibility of applications, from small scale to big scale".[108]We have proved ... that after our stores of oil and coal are exhausted the human race can receive unlimited power from the rays of the sun.-Frank Shuman, New York Times, July 2, 1916[109]ISO StandardsThe International Organization for Standardization has established a number of standards relating to solar energy equipment. For example, ISO 9050 relates to glass in building while ISO 10217 relates to the materials used in solar water heaters. See alsoRenewable energy portalSustainable development portalEnergy portalAirmassCommunity solar farmDesertecEnergy storageGlobal dimmingGreasestockGreen electricityHeliostat

Will there be a ps10

Add your answer:

What content can be found on the PS10 website?

How big is the PS10 solar Power tower?

What are the various renewable source of energy that could be harnessed to enable India to tide over its energy crisis?

What does sola mean in science?

Resources

Top Categories

Product

Company