Wire size is based of the amperage of the device. To answer this question the amperage is needed or the wattage and voltage of the device.
To answer this question correctly the wattage and voltage of the range is needed.
To answer this question the voltage of the oven is needed.
Use the National Electric Code wire size tables for various applications.
AWG # 6 copper or AWG # 4 aluminum
Just replace the cord. Your manual has instructions.
When the wire shorted it probably burned through. You should employ a qualified electrician to help you troubleshoot the problem.
12 AWG in most circumstances.
The most common size wire for an electric range is 3C - #8 connected to a 40 amp two pole breaker for operation on 240 volts. <<>> Wiring specifications are located on the unit nameplate, where the serial and model number are.
AWG # 10
Use the National Electric Code wire size tables for various applications.
Electrical range is usually 220V and requires at least a 40A breaker. In a three wire configuration, the white power carries 110V, the black wire carries 220V and the green wire is the ground. A four wire configuration has an additional wire that is neutral.
AWG # 6 copper or AWG # 4 aluminum
who invented electric wire
Wire sizing is based on the amperage of the connected load. The wire size number 12 is rated at 20 amps.
10-32 unf-2a <<>> The wire size does not need to be calculated. Use a wire terminal end that crimps to the wire. These terminal end come in various wire sizes and bolt hole sizes. Pick the correct end for the wire size you are using and then in that wire size range, pick the correct bolt hole size that fits the bolt.
As a range is a high current device, the electrical code stipulates that it has to have its own breaker. The breaker protects the wire feeder. An electric range breaker is set to trip at 40 amps. Using a smaller wire that #8 is not allowed as their ratings are below that of the #8 wire. #10 wire rating is 30 amps, #12 wire rating is 20 amps, and #14 wire rating is 15 amps.
I remember you use to place a thick wire type triangle on top of the burner
Just replace the cord. Your manual has instructions.
When the wire shorted it probably burned through. You should employ a qualified electrician to help you troubleshoot the problem.