Michael Faradeys laws of electromagnetic induction:
When a current is passed through stator winding, an alternating flux created on the stator winding which in turn cuts a rotor winding(wire wound motor)/short circuited copper bar(squirrel cage motor), then a current flows through it and as above one motors works.
Cycloconverter is a ac to low frequency ac converter.which convert ac to low freq.ac with help of scr.
usually ac 110v even on the dc motors
even a single wire can tansmitam signal in which ac signal pass through it
the motors are a well known weakness - failing at around 40k
sounds like the blend doors arent working in the heat/ac plenum. take a look at all your door motors and see if they are connected and working properly
ac voltage
Personally, AC and DC drives are quite easy to understand. DC drive is a device that uses AC as a power source to control the DC device.
AC current is used in motors.
there are many types of ac motor, each of those work on a specific/ certain task. Ac motors are really helpful to world today
ac motor is nothing but induction motor.So check out for characteristics of induction motors.
Toyota uses AC motors, Honda uses DC motors. It varies with design goals.
What is the working principle of venturimeter?