even a single wire can tansmit
am signal in which ac signal pass through it
working principle of a compressor
I think your are asking about the working principle of a pneumatic transmitter. (not transmeter) A pneumatic transmitter measures liquds or air temperatures over a given range-usually a 200 degree temperature range. The range, selected for its purpose could be -40 to +160 or 0 to 200 -as in the case of Honeywell or even 100 deg. ranges, as in the case of say-Johnson Controls. (0-100) Aside from temperature range, the other important criteria is the output of the transmitter. In the case of commercial controls, the correlation of 200 degree temperatures (which is 201 values, not 200) occurs over a pressure span/output of 3 to 15 pounds.(13 values) For example, in the case of a 200 degree transmitter of say 0 to 200 degrees, the zero temperature value output equates to a 3 psi signal. At 200 degrees, the top of the range, the transmitter would output a 15 psi signal. In other words every degree change up from zero degrees would account for a pressure increase (rounded)of .064 psi. (13 pounds divided by 201 degrees)=.0646766) Pneumatic transmitters are typically direct acting and are one-pipe constant bleed devices. Their working principle involves movement of a flapper a given distance in direct response to the sensed temperature acting upon it. As the temperature rises, the bleed port positions itself toward a closed position which allows less air to escape to atmosphere. Less air to atmosphere dictates more air building up in the air line. This value is then transmitted/measured by the controller-which is pneumatically attached to the transmitter.
The principle of a fuse is to have the flow to the conductor. This will give it the power.
Geophone Are Moving Coil Electromagnetic type principle is contained
gravity separation
The eqivalence principle is a principle that replaces the actual source i.e (antenna , transmitter) by eqivalent sources
What is the working principle of venturimeter?
A working principle is a regulation or rule that is used so that work can be done. This is a general phrase that can be used in any circumstance from the working principle of a motor, to the working principle of a solar cells.
i think the transmitter is on gs desk were he is working go get that and try
A principle is a way of working or ethical standards.
1. Explain the working principle of a milling machine?
explan working and principle of nuclear reacter
piezo electric principle
De Mogan's Principle
principle of a totalstation
working principle of a compressor
working principle of dialysis