Yes
with no problem. you could bolt a 572 in. remember trans will have to be a 4l80e trans. and if its carb just use a turbo 400 trans
Yes. It's a relatively straight-forward swap.
4, to 6 degrees advanced or BTDC.
im not familer much with the older Chevy trucks, im assuming it has a 350 in it and that's a small block a 454 is a bigblock, they have different transmission mounts so you would have to get new trans missin and after thay you need to determine if you need a new driveshaft or you can sometimes cut the one you have YES A 454 WILL FIT WITHOUT MODIFICATIONS,YOU WILL NEED A BIGGER RADIATOR
Many. 348 would be a small block, whereas the 454 is a big block.
Why would you want to put a Chevy 454 in a ford in the first place
Were is the temperature heat sensoe on a 454 chevy motor.
what is the ignition timing for a 1988 Chevy 454 engine
i have a 96 suburban with the same engine,owners manual says 7500 lbs (4l80 trans)
You can't... There's not enough steel in the cylinders to bore it that far. If you want a 454, you need to by a big block 454 Chevy engine.
That would be the 400 turbo.
Yes it will fit. bellhousing will fit but the torque converter will not bolt up to flex plate (flywheel) not to mention the trans cant handle the increased amount of torque with big block