Want this question answered?
Short wire has less resistance Long wire has more resistance Thick wire has less resistance Thin wire has more resistance
yes, Easy of flow of current increases with increase of area of cross section.
Wind turbines blades are about 15 meters long (average wind turbine) The thickness of the blade depends on the length of the blade. The width is about 10% of the length, in this case, would be about 1.5 meters thick.
As long as the voltage between the ends of the circuit remains constant, the current through the circuit is inversely proportional to the total effective resistance of the circuit.
No. Other things being equal, a long wire has more resistance than a short wire.
Short wire has less resistance Long wire has more resistance Thick wire has less resistance Thin wire has more resistance
"Better" depends on how much resistance you need for your circuit design.A short thick wire will have less resistance than a long thin wire of the same substance.Whether that's better or worse depends on how you plan to use the wire.
Copper will.
yes, Easy of flow of current increases with increase of area of cross section.
The maximum current that a cell can deliver flows when the resistance between the terminals of the cell is zero. This situation occurs when the terminals are connected by a conductor with very low resistance, such as a thick wire or a wrench. But not for long.
it just won't take long
Makeups can help your eye lashes to be long and thick.
its too small make a bigger one
Cacti have thick stems and skins because they need to store water over long periods of time, and the liquid would evaporate quickly in deasert conditions.
Voltage = Current x Resistance. To calculate the voltage drop of a piece of wire, you would have to know the current flowing in the circuit and the resistance of the wire. The resistance of wire depends on the material it is made of, the length, and the cross sectional area (also called gauge or AWG). Short thick wires have less resistance than long thin wires. You can look up the resistance of the wire on the Internet, and you can measure the current flowing by connecting an ammeter in series with the circuit. Multiply those two numbers and you will have closely approximated the voltage drop across the wire.
64mm long, 38mm wide and 14mm thick
it would grow so big it would destroy the world so beware get the milatery