Want this question answered?
yes
It will fit, but make sure that you swap the engine harness. You will have Transmission problems if you don't.
No they will not directly interchange. Hyundai did not start using it's engines into the Kia Rio until late 2005 at the launch of the 3rd Gen Rio. The 1st (2001-2002) and 2nd (2003-2005) Kia Rio's use a variation of the Mazda B6 engine.
yes it will, all the kia Rio gearboxs are the same up to the kia Rio 2006 models, but if you want to put a gear box in a kia Rio, it probably would be best to get it done professionally
Yes, you can use all 2001-2005 1.5 or 1.6 Liter Kia Rio 4 cyl. engines they are interchangeable and should be plug and play, just swap no need to change computer or anything...
No, because every year of Kia has an entirely different engines and transmissions. A 99 Sephia, 01 Spectra, or 05 Spectra engine or transmission will work fine.
WHAT engines can i put in a 01 Rio i wanna put a new engine tranny in but still want to stay in good gas millage
Kia Rio 2005 JB series, can the car successfully tow a trailer with 2 motorbikes on it?? Conflicting stories, will is wreck the engine?? Bikes weigh in total 477kg trailer probably around 320kg!
No, unfortunatley it will not.
The socket size for the front axle nut on a 2004 KIA Rio is typically 32mm. It is recommended to verify this size with the specific vehicle to ensure a proper fit.
it might BUT the real question should be will the Mazda computer operate the Kia engine correctly, and that answer is a big no.
No, unfortunately they are different. 01 and 02 models have the same exact suspension including the wheel hubs, but the face-lifted 03 model along with later models have a slight difference in the design where the screws fit. But it has nothing to do with whether it is the sedan or the rx-v, it the model's year that matters.