The correct answer is NO
BUTI have seen systems with two unrelated problems have this happen. By forcing back the pistons in the caliper pushes the brake pedal up so the brake lights go out.The second problem is related to why the pedal does not return correctly:
And so on
If you want to know if there is somewhere you can get instruction on changing brake pads because you need your brake pads changed, then the answer would be yes.
There are many places where one can find instructions on changing brake pads. A good place is the website "edmunds" to find instructions on changing brake pads.
When wanting to save some cash and change a set of brake pads at home then it is possible to find help and advice on how to change the brake pads on the internet. Such websites as Edmunds have an article on changing brake pads, and the Halfords website also offers information about changing brake pads.
my lights are not working when i changed the pads on my peutgeo partner van
no
how do change brake pads on a 2002 dodge pickup 4x4
Possible wrong rotors???
if when changing brake pads there is air in the system, improperly installed pads, the air in the lines expand increasing pressure on the pad. bleeding the brakes solves this problem.
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
Brake lights on can mean no brake fluid, worn out brake pads, faults in the master cylinder. Must take your car to the garage immediately. Worn out brake pads can damage the discs which are expensive to change.
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
Check the brake light switch, usually at the top end of the footbrake lever. These switches sometimes stick and need to be replaced. It is highly unlikely to be the brake pads, you would feel the drag and the pads would smoke.