Yes! Teenage boys generally are appreciative of anything that is electrical or otherwise beeps and makes noise.
Outdoor sensor lights can be purchased at most home improvement stores. Home Depot and Lowe's both sell outdoor sensor lights in their stores and online.
how do you turn a light sensor on, on a outdoor wall light fixture
The best places to put an outdoor motion sensor lighting are usually the places where one goes by in the night, such as the way from the garage to the frontdoor.
Depending on you country of residence, one can purchase outdoor motion sensor lights in local hardware stores, lighting shops and large shop chains such as Walmart and Asda.
There should be a switch on the light itself to disconnect the sensor.
Not sure what you're needing to do. But to set up the clock and the outdoor temperature sensor, make sure the batteries are new for both. Put the batteries in the outdoor sensor first. Wait to see the temperature reading on the sensor. Then put the batteries in the clock. In about 15 minutes the outdoor temperature should show on the clock. Do not set the clock until the outdoor temperature is displayed. You can set the clock manually, or set the button on the back to atomic so that it will automatically receive the time.
anything that lights up the night. Outdoor lighting, indoor lighting, etc.
Surface Ship
One of the easiest things that you can do to protect your family and property is to install an outdoor light with a motion sensor. Once you install the outdoor light, if any animal or person comes within range of the sensor, the light will turn on. This lets individuals inside the home know that someone is present. Criminals look for houses without adequate outdoor lighting so that they can get in and out of the house without being seen by neighbors. If you install a security light, they will pass your house by and look for a more vulnerable target.
After playing with mine for a while, i found that resetting the master unit, followed by the outside temp sensor, made the master unit pick up the outside temp sensor.
The Crankshaft Position Sensor is behind the crankshaft pulley (harmonic balancer). You will need a ½-inch drive breaker bar and appropriate socket.
Haynes repair manual available from www.amazon.com. Not hard. Locate sensor, unplug electrical connector, use socket of appropriate size, remove.