Maybe it's coming from the rear brakes.
It depends on where the grinding noise is coming from. Most of the time the grinding is coming from the brakes and the brake pads need to be replaced. If they've been grinding for a while, the rotors will need to be resurfaced or replaced. Other possibilities for grinding are worn axle bearings, or a problem with the clutch. If the clutch goes out, there will be a grinding noise when you try to shift gears.
When Brake Rotors Are To Thin To Turn On A Brake Lathe To Have The Minumn Thickness. They Need To Be Replaced.
probably, if the pads are worn, or the rotors \ drums are scarred, there will be a grinding noise, plus you should be able to feel it through the brake pedal. most modern brake systems have quealers on the pads to tell you when they are getting worn and should be replaced. If you have a disc brake system, you should be able to inspect the rotors quite easily. Look for gouges in the surface of the rotor. If they are badly gouged, they should be turned or replaced.
your barrins in the wheels
I would suspect your brake pads are worn out. The grinding you are hearing is the destruction of your rotors taking place. It is also possible that you may have a defective wheel bearing. Inspect your brake system.
Your front breaking pads are needed to be repalced, you might have to replace rotors.
A grinding noise when braking can occur when the brake pads are going bad. You are hearing the brake grinding on the metal discs.
No! Something is wrong.
The brake pads are worn out and need to be replaced. The grinding sound means your brakes are about to stop working.
Type your answer here... because your brake pads are grinding into your rotors --change your brake pads and most likely your rotors too
Did you have the rotors turned or replaced? If the rotor surface was not resurfaced it can often cause noise, premature wear and uneven stopping.
What would cause a grinding noise after a tire is replaced and the brakes are not worn?