0
What else can I help you with?
How do you remove an alternator off of a 98 dodge avenger?
To remove the alternator from a 1998 Dodge Avenger, first disconnect the negative battery cable to prevent any electrical short circuits. Then, remove the serpentine belt by loosening the tensioner, and unbolt the alternator from its mounting bracket. Disconnect the electrical connectors and the positive battery cable from the alternator, and finally, carefully lift the alternator out of the engine bay. Reinstall the new alternator by reversing these steps.
Where do you put the cable clamps to recharge battery on 2014 dodge avenger?
To recharge the battery on a 2014 Dodge Avenger, connect the positive (red) cable clamp to the positive terminal of the battery, which is marked with a "+" symbol. Then attach the other end of the positive cable to the positive terminal of the charger. Next, connect the negative (black) cable clamp to the negative terminal of the battery, marked with a "-" symbol, and the other end to a metal ground point on the vehicle or the negative terminal of the charger. Always ensure the vehicle is turned off before connecting the cables.
How do you change battery in 2004 gmc sierra?
1. Remove negative battery cable 2. remove positive battery cable 3. remove battery 4. install new battery 5.attach positive cable 6.attach negative cable
How do you tell if your alternator is bad in your 1996 dodge neon?
you could pull off your positive battery cable if it stalls out then you alternator is the problem
To Test the output of the alternator on a1998 Maxima can you disconnect the neg battery cable?
Start the car and while it is running, disconnect the positive cable from the battery. If the car stalls, the alternator is bad.
How do you disconnect the positive ternimal of my car battery?
First remove the Negative cable first, and then you can remove the positive cale safely. Al
Which cable do you remove first on battery of Nissan 2004 Sentra?
The negative cable is removed first, then the positive. To re-connect, the positive goes first, then the negative.
How do you connect a battery cable on a 1999 Ford Escort Sport?
After removing the positive and negative cable, follow the negative cable to where it's grounded to the wheel well. Remove the end of the cable with the wrench. Track the positive cable to its connection on the driver's side of the engine and remove it with the wrench. Now, attach the new positive cable first and install the negative cable last and start the car to ensure that the connections are working on your Ford Escort.
How do you change positive battery cable in a 1998 Cherokee sport?
To change the positive battery cable on a 1988 Jeep Cherokee trace the end of the cable to the starter. Unplug the battery then remove the cable from the starter. Measure the old positive cable with the new and be sure to replace the unit at the right size.
Why you need to remove the battery negative cable before the positive cable?
You don't. You remove the positive cable first. Here's why. If you remove the negative cable, then it's dangling or it's in a place where the tension on the cable can move it and touch a metal part of the either the body, frame or other component, thus inadvertently completing the circuit. With the power still connected while you're performing maintenance, you can get shocked, or fry a component. Same with removing jumper cables, remove the positive first, then the negative. If the positive cable hits the body or the frame, nothing happens, it's two negative sides meeting together, NOT completing the circuit.
Where are jump start terminals Mercedes elegance?
The battery post positive terminal is where you connect the positive cable. Connect the negative cable to anyplace on the engine or chassis. Connect positive first and remove it last.
How do you take out a starter on a 1988 Nissan pickup with a v6 engine?
remove neg.cable.then positive cable cable from starter,remove male to female wire ,then remove 2 bolts holding starter to engine.
