0
The term "open BX" could mean a couple of different things.
First, and probably most likely, this is referring to a condition where the home inspector has found an electrical junction box that is without a tight fitting cover. These junction boxes are usually found in an attic or crawlspace and most often they exist due to a remodel that was done at some point in the past.
Next, the "BX" in the recommendation could refer to "BX cable", which is a type of metal sheathing that surrounds electrical wires that are installed in areas that are subject to impact or other damage. These electrical runs you might find in your garage, near your furnace, or over suspended ceilings in commercial office space. So in this example, the recommendation of "open BX" could refer to installation where this metal sheathing has pulled away and detached from its termination point leaving the wiring exposed.
Both of these conditions are a potential fire hazard and should be corrected for safety. I would recommend giving the home inspector a call and have him walk-through the inspection report with you. This way you will know for sure what he's referring to.
What else can I help you with?
Can you box in an electrical panel in an open room?
That depends on what you mean by "box in". You must always provide access to an electrical panel.
Electrical Installation?
form_title=Electrical Installation form_header=Power up your home! Have the electrical wiring installed in your home by the professionals. Do you get your electrical supply from a solar panel? = () Yes () No () Unsure Is any of the electrical work going to be done outdoors? = () Yes () No () Unsure Has any electrical work been done on your home in the past?= () Yes () No () Unsure If so, when?=_
What does an open ground mean and how can it affect the safety of electrical systems?
An open ground in an electrical system means that the grounding wire is not properly connected. This can affect safety because without a proper ground, there is an increased risk of electrical shock or fire hazards.
What does "open ground" mean on an outlet tester?
"Open ground" on an outlet tester means that the electrical outlet is not properly grounded, which can pose a safety hazard.
Is it safe to use an open ground outlet in my home?
Using an open ground outlet in your home is not safe because it can increase the risk of electrical shock or fire. It is important to have grounded outlets to ensure proper safety and protection.
What does "open ground" mean on an outlet and how does it affect the safety and functionality of the electrical system?
"Open ground" on an outlet means that the electrical circuit is not properly grounded, which can pose a safety hazard. Without a proper ground connection, there is an increased risk of electrical shock or fire. Additionally, devices plugged into outlets with open grounds may not function correctly or could be damaged due to improper electrical flow. It is important to address and fix open ground issues promptly to ensure the safety and functionality of the electrical system.
Do you have to open your place for inspection?
gfgfgggggggggggggggggggggggggggggggggggggggggggggdddddddddddddddgggggggjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM,MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMYOUR MUM IS DEAD
Investigating Electrical Issues in the Home?
The most common cause of a home catching on fire is electrical issues. Faulty wiring, frayed wires, and improper electric routing are all issues that can arise in a home. This is especially true if you live in an older home that was built before the 1970's. If you have experienced flickering lights, observed open or frayed wiring, or experienced other electrical issues, it is imperative that you talk to an electrical contractor in your area right away. Electrical contractors can thoroughly investigate the wiring of your home and ensure that there are no safety violations or fire hazards apparent.
Do I need any special certification to open a pipe inspection service?
Yes, you do need a certification to open a pipe inspection service. This certification will also help you to show your clients that you are certified and are knowledgable in that area. http://nationalwelding.com/ is a site for the National Welding Inspection School that you can achieve your certification at.
How can I fix an open ground outlet in my home?
To fix an open ground outlet in your home, you can replace the outlet with a new one that has a ground connection. Alternatively, you can hire a licensed electrician to install a ground fault circuit interrupter (GFCI) outlet, which can provide protection even without a ground wire. It is important to address open ground outlets promptly to ensure electrical safety in your home.
What does open hot mean when you test an electrical outlet?
"Open hot" means that there is no power coming to the outlet's hot wire, which carries electricity. This could be due to a tripped circuit breaker, a damaged wire, or a faulty outlet. It is important to address this issue promptly to avoid electrical hazards.
What is the home of a dog called?
Kennel (and it can also mean an open drain or water course in a street)A kennel
