0
can the scanner also be used as a copier. ie instead of just scanning into a program is there a button to press to hit copy and have it make one?
Wiki User
∙ 14y ago
No, the Fujitsu FI 5530C Sheetfed Scanner does not have a paper output system to be used as a copier.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you switch the locked out channels on a regency scanner Z 10?
Simply press the SCAN button to put the scanner in scanning mode, then press the number button for the channel you want to lockout or unlock. For example, to lockout channel 5, just press the "5" button while scanning; to unlock channel 5, press "5" again. This works for many Regency scanner models.
How do you program a Croba Police Scanner Model SR900?
Press the manuel button then press the channel number you want to program and then press the manuel button again. Press the frequency numbers in t\and then press the "E" for enter. Now your police scanner is programmed. :)
How do you program a Regency inf 5 police scanner?
use the state button it has about 50 channels for each state
What LO stand for on a police scanner?
LO on a police scanner stands for Lock Out. The lock out button has the scanner skip those frequencies that are tagged to be locked out. For scanners with this ability frequencies (most) that are either pre-programmed or frequencies that have been inputted manually can be locked out. These locked out frequencies can later be reversed so they are no longer locked out from the scanning sequence.
What is the button on a bar code scanner for?
After inputing the communication line into the button of the barcode scanner, you can use it. Recently Sumlung tech. has a creative product special for the button to add more functions to the barcode scanner.
How do you program a uniden bearcat 30 channel 10 band radio scanner?
--------------------------------------------------------------------------------- Turn the unit on - it will begin in scan mode. 1. Press the "MANUAL" button. The unit will stop scanning and the display will indicate the channel it stopped on (one through 10). 2. Continue pressing the "MANUAL" button until the display indicates the desired channel. 3. Press the "E" button. 4. Enter the desired frequency. 5. Press the "E" button again. The frequency is now programmed for the channel you selected. You can verify that your entry is correct by pressing the "REVIEW" button.
How do you program a cobra scanner model sr900?
Programming the Cobra SR900 Power the scanner up. Use the "manual" key to select the channel to be programmed. Press the "E" button, then enter the frequency (you want to program in) and press the "E" key when you are done. Press "manual" to select the next channel and repeat.
How do you program a Cobra Police Scanner Model SR900?
Programming the Cobra SR900 Power the scanner up. Use the "manual" key to select the channel to be programmed. Press the "E" button, then enter the frequency (you want to program in) and press the "E" key when you are done. Press "manual" to select the next channel and repeat.
Do you do picture scanning?
You can scan a picture by placing it on the scanner connected to your computer. Then, press the scan button and follow the instructions. You might have to choose the scan option from the computer's menu.
How do you program regency scanner model r1077?
One should program a Regency Scanner with the model number r1077 by first turning the device's power on. Then press the manual button until the channel wanted is shown. Once the channel number is shown hit enter, which will make the frequency channel that number. Then one can go to the next channel number and hit hold, or delay, to hold the number for dispatch. In order to lock certain channels one should hit the lock button when the channel number comes up instead of enter, and this will keep that particular channel locked.
How do you program a bearcat bc65xlt scanner?
Turn on the radio Press the "band" button Keep pressing the "band" button until you come within the parameters of the frequency that you want Let the radio scan until it gets close to the actual frequency that you're looking for Press the "hold" button and use the arrow "up" or "down" button till you lock in the correct frequency Once you have the frequency locked in, press the "program" button Press the "private" button The unused channel will be flashing Press the "program" button, this locks the frequency into that channel Continue this process until all of the frequencies are loaded into the radio
Do you place your picture on scanner to scan?
It really all depends on what kind of scanner you have. The Glass Versions. Put the picture on the glass under the lid of the scanner - make sure that the corner is up to where the arrows indicate that they should be. Close the lid slowly so that you don't make the paper fly and you set up the options in the panel - choose whether you want a color scan or black or white, and what kind of paper you are using. There should be a finish/start button on the printer somewhere that you press after you finish. The Suck-Into-Machine-and-Spits-Out-Paper Version. Set your picture in the tray and resize the tray so that the picture will fit snugly into the scanning portion. It's pretty much the same as above - you set up the printer/scanner so that it's scanning the picture and make sure you choose whether you want it photocopied or scanned into your computer. Then you make the choice of black and white or color scan and you hit the finish or start button, depending on your scanner.
