Component video cables are optical and can vary significantly in build quality so do not only look for the lowest price. Because there are many manufacturers, do your due diligence with this product and look for online reviews before any hasty purchases. Also make sure that this isn't your only option for transmitting video; newer, higher quality cables like HDMI are available and unless restricted by your set, you would do better to pass on component.
no
Blue cables designate one of the three wires for a component video cable connection. Along with the Red and Green wires, these three form a component video cable.
It allows you to connect component cables into a HDMI connector/cable on the tv set.
no
You may also be able to use a component or S video cable depending on the devices
No, the S-cable is the weak link in your plan.
You will either need a composite(not component) cable or a HDMI cable. I think you can use S-Video but S-Video doesn't compare to HDMI or composite.
You will need a converter box. It isn't as simple as a cable to convert one to the other. There are many on the market, Google Component Video to VGA converter.
Check your cable. If you are using a universal component cable, and the switch on the cable is set to video, you will get only black and white on the Wii. Flip the switch to component and your problem may vanish - mine did.
A red-white-yellow (RWY) cable is designed for stereo audio and composite video. A red-green-blue cable is designed for component video on your DVD player. Most RWY cables will have the yellow cable noticeably thicker than the red and white. This is because there is extra shielding in the video cable to avoid interference. While short runs of RWY cable can be used for component video, the picture can suffer if there is electrical interference in the Red and White cables because of reduced shielding.
S-video is a two wire interface while ypbbr is a three wire interface. Therefore, an S-video cable cannot be used for any component signals. S-video supports only standard definition, that is, PAL or NTSC color encoding. Component signals (ypbbr) support both standard definition and high definition.
A component video splitter allows a signal to be transmitted from one device to others. One can connect their cable and with the use of a splitter allow it to be transmitted to a different device.